Assignment_2
Logan
6/25/2021
Q2
Carefully explain the differences between the KNN classifier and KNN regression methods.
The difference is that the KNN classifier looks to classify results into qualitative groups based on using the most common group found with K nearest neighbors, clusters. KNN regression works to do the same, but gives us a quantitative outcome based on the same technique. It can be dependent on the type of data.
Q9
This question involves the use of multiple linear regression on the Auto data set.
library(ISLR)## Warning: package 'ISLR' was built under R version 4.0.5data(Auto)summary(Auto)## mpg cylinders displacement horsepower weight
## Min. : 9.00 Min. :3.000 Min. : 68.0 Min. : 46.0 Min. :1613
## 1st Qu.:17.00 1st Qu.:4.000 1st Qu.:105.0 1st Qu.: 75.0 1st Qu.:2225
## Median :22.75 Median :4.000 Median :151.0 Median : 93.5 Median :2804
## Mean :23.45 Mean :5.472 Mean :194.4 Mean :104.5 Mean :2978
## 3rd Qu.:29.00 3rd Qu.:8.000 3rd Qu.:275.8 3rd Qu.:126.0 3rd Qu.:3615
## Max. :46.60 Max. :8.000 Max. :455.0 Max. :230.0 Max. :5140
##
## acceleration year origin name
## Min. : 8.00 Min. :70.00 Min. :1.000 amc matador : 5
## 1st Qu.:13.78 1st Qu.:73.00 1st Qu.:1.000 ford pinto : 5
## Median :15.50 Median :76.00 Median :1.000 toyota corolla : 5
## Mean :15.54 Mean :75.98 Mean :1.577 amc gremlin : 4
## 3rd Qu.:17.02 3rd Qu.:79.00 3rd Qu.:2.000 amc hornet : 4
## Max. :24.80 Max. :82.00 Max. :3.000 chevrolet chevette: 4
## (Other) :365a.)
Produce a scatterplot matrix which includes all of the variables in the data set.
pairs(Auto)
b.)
Compute the matrix of correlations between the variables using the function cor(). You will need to exclude the “name” variable, which is qualitative.
names(Auto)## [1] "mpg" "cylinders" "displacement" "horsepower" "weight"
## [6] "acceleration" "year" "origin" "name"cor(Auto[1:8])## mpg cylinders displacement horsepower weight
## mpg 1.0000000 -0.7776175 -0.8051269 -0.7784268 -0.8322442
## cylinders -0.7776175 1.0000000 0.9508233 0.8429834 0.8975273
## displacement -0.8051269 0.9508233 1.0000000 0.8972570 0.9329944
## horsepower -0.7784268 0.8429834 0.8972570 1.0000000 0.8645377
## weight -0.8322442 0.8975273 0.9329944 0.8645377 1.0000000
## acceleration 0.4233285 -0.5046834 -0.5438005 -0.6891955 -0.4168392
## year 0.5805410 -0.3456474 -0.3698552 -0.4163615 -0.3091199
## origin 0.5652088 -0.5689316 -0.6145351 -0.4551715 -0.5850054
## acceleration year origin
## mpg 0.4233285 0.5805410 0.5652088
## cylinders -0.5046834 -0.3456474 -0.5689316
## displacement -0.5438005 -0.3698552 -0.6145351
## horsepower -0.6891955 -0.4163615 -0.4551715
## weight -0.4168392 -0.3091199 -0.5850054
## acceleration 1.0000000 0.2903161 0.2127458
## year 0.2903161 1.0000000 0.1815277
## origin 0.2127458 0.1815277 1.0000000c.)
Use the lm() function to perform a multiple linear regression with mpg as the response and all other variables except name as the predictors. Use the summary() function to print the results. Comment on the output. For instance:
fit <- lm(mpg ~ . - name, data = Auto)
summary(fit)##
## Call:
## lm(formula = mpg ~ . - name, data = Auto)
##
## Residuals:
## Min 1Q Median 3Q Max
## -9.5903 -2.1565 -0.1169 1.8690 13.0604
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) -17.218435 4.644294 -3.707 0.00024 ***
## cylinders -0.493376 0.323282 -1.526 0.12780
## displacement 0.019896 0.007515 2.647 0.00844 **
## horsepower -0.016951 0.013787 -1.230 0.21963
## weight -0.006474 0.000652 -9.929 < 2e-16 ***
## acceleration 0.080576 0.098845 0.815 0.41548
## year 0.750773 0.050973 14.729 < 2e-16 ***
## origin 1.426141 0.278136 5.127 4.67e-07 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 3.328 on 384 degrees of freedom
## Multiple R-squared: 0.8215, Adjusted R-squared: 0.8182
## F-statistic: 252.4 on 7 and 384 DF, p-value: < 2.2e-16i.) .
Is there a relationship between the predictors and the response?
With a p value of 2.2e-16, this indicates there is a significant relationship between the predictors and the response.
ii.)
Which predictors appear to have a statistically significant relationship to the response?
Displacement, weight, year, origin.
iii.)
What does the coefficient for the year variable suggest?
The year variable indicates that with each 1 year increase that occurs, there is an increase of 0.750773 mpg.
d.)
Use the plot() function to produce diagnostic plots of the linear regression fit. Comment on any problems you see with the fit. Do the residual plots suggest any unusually large outliers? Does the leverage plot identify any observations with unusually high leverage?
par(mfrow = c(2, 2))
plot(fit)
The Residuals vs Fitted plot shows that there may be slight non linear data. This is also seen in the QQ plot. The QQ plot is mostly linear with a few outliers, and the Leverage plot shows that there are a few outliers.
e.)
Use the * and : symbols to fit linear regression models with interaction effects. Do any interactions appear to be statistically significant?
fit2 <- lm(mpg ~ . -name + displacement * weight, data = Auto)
summary(fit2)##
## Call:
## lm(formula = mpg ~ . - name + displacement * weight, data = Auto)
##
## Residuals:
## Min 1Q Median 3Q Max
## -9.9027 -1.8092 -0.0946 1.5549 12.1687
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) -5.389e+00 4.301e+00 -1.253 0.2109
## cylinders 1.175e-01 2.943e-01 0.399 0.6899
## displacement -6.837e-02 1.104e-02 -6.193 1.52e-09 ***
## horsepower -3.280e-02 1.238e-02 -2.649 0.0084 **
## weight -1.064e-02 7.136e-04 -14.915 < 2e-16 ***
## acceleration 6.724e-02 8.805e-02 0.764 0.4455
## year 7.852e-01 4.553e-02 17.246 < 2e-16 ***
## origin 5.610e-01 2.622e-01 2.139 0.0331 *
## displacement:weight 2.269e-05 2.257e-06 10.054 < 2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 2.964 on 383 degrees of freedom
## Multiple R-squared: 0.8588, Adjusted R-squared: 0.8558
## F-statistic: 291.1 on 8 and 383 DF, p-value: < 2.2e-16With the interaction terms displacement and weight, we see that they are statisitcally significant together.
f.)
Try a few different transformations of the variables, such as log(X), √X, X2. Comment on your findings.
par(mfrow = c(2, 2))
plot(log(Auto$weight), Auto$mpg)
plot(sqrt(Auto$weight), Auto$mpg)
plot((Auto$weight)^2, Auto$mpg)
The log transformation looks to be the tightest looking linear plot, but is very close to sqrt as well.
Q10
This question should be answered using the Carseats data set.
attach(Carseats)a.)
Fit a multiple regression model to predict Sales using Price, Urban, and US.
fit3 <-lm(Sales~Price+Urban+US)
summary(fit3)##
## Call:
## lm(formula = Sales ~ Price + Urban + US)
##
## Residuals:
## Min 1Q Median 3Q Max
## -6.9206 -1.6220 -0.0564 1.5786 7.0581
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 13.043469 0.651012 20.036 < 2e-16 ***
## Price -0.054459 0.005242 -10.389 < 2e-16 ***
## UrbanYes -0.021916 0.271650 -0.081 0.936
## USYes 1.200573 0.259042 4.635 4.86e-06 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 2.472 on 396 degrees of freedom
## Multiple R-squared: 0.2393, Adjusted R-squared: 0.2335
## F-statistic: 41.52 on 3 and 396 DF, p-value: < 2.2e-16b.)
Provide an interpretation of each coefficient in the model. Be careful—some of the variables in the model are qualitative!
Price and US are significant predictors of Sales. For a $1 increase in price, there is a decrease in sales around 54 dollars. Sales inside of the US are 1,200 dollars higher than sales outside of the US. Urban has no effect on Sales.
c.)
Write out the model in equation form, being careful to handle the qualitative variables properly.
Sales=13.043469−0.054459Price−0.021916UrbanYes+1.200573XUSYesSales=13.043469−0.054459Price−0.021916UrbanYes+1.200573XUSYes
d.)
For which of the predictors can you reject the null hypothesis H0 : βj = 0?
Price and US
e.)
On the basis of your response to the previous question, fit a smaller model that only uses the predictors for which there is evidence of association with the outcome.
fit4 <-lm(Sales~Price+US)
summary(fit4)##
## Call:
## lm(formula = Sales ~ Price + US)
##
## Residuals:
## Min 1Q Median 3Q Max
## -6.9269 -1.6286 -0.0574 1.5766 7.0515
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## (Intercept) 13.03079 0.63098 20.652 < 2e-16 ***
## Price -0.05448 0.00523 -10.416 < 2e-16 ***
## USYes 1.19964 0.25846 4.641 4.71e-06 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 2.469 on 397 degrees of freedom
## Multiple R-squared: 0.2393, Adjusted R-squared: 0.2354
## F-statistic: 62.43 on 2 and 397 DF, p-value: < 2.2e-16f.)
How well do the models in (a) and (e) fit the data?
Each model explains around 23% of the variance in Sales, poor prediction power.
g.)
Using the model from (e), obtain 95 % confidence intervals for the coefficient(s).
confint(fit4)## 2.5 % 97.5 %
## (Intercept) 11.79032020 14.27126531
## Price -0.06475984 -0.04419543
## USYes 0.69151957 1.70776632h.)
Is there evidence of outliers or high leverage observations in the model from (e)?
R has built in functions to that can help us identify influential points using various statistics with one simple command. Researchers have suggested several cutoff levels or upper limits as to what is the acceptable influence an observation should have before being considered an outlier. For example, the average leverage (p+1)n(p+1)n which for us is (2+1)400=0.0075(2+1)400=0.0075.
par(mfrow=c(2,2))
plot(fit4)
summary(influence.measures(fit4))## Potentially influential observations of
## lm(formula = Sales ~ Price + US) :
##
## dfb.1_ dfb.Pric dfb.USYs dffit cov.r cook.d hat
## 26 0.24 -0.18 -0.17 0.28_* 0.97_* 0.03 0.01
## 29 -0.10 0.10 -0.10 -0.18 0.97_* 0.01 0.01
## 43 -0.11 0.10 0.03 -0.11 1.05_* 0.00 0.04_*
## 50 -0.10 0.17 -0.17 0.26_* 0.98 0.02 0.01
## 51 -0.05 0.05 -0.11 -0.18 0.95_* 0.01 0.00
## 58 -0.05 -0.02 0.16 -0.20 0.97_* 0.01 0.01
## 69 -0.09 0.10 0.09 0.19 0.96_* 0.01 0.01
## 126 -0.07 0.06 0.03 -0.07 1.03_* 0.00 0.03_*
## 160 0.00 0.00 0.00 0.01 1.02_* 0.00 0.02
## 166 0.21 -0.23 -0.04 -0.24 1.02 0.02 0.03_*
## 172 0.06 -0.07 0.02 0.08 1.03_* 0.00 0.02
## 175 0.14 -0.19 0.09 -0.21 1.03_* 0.02 0.03_*
## 210 -0.14 0.15 -0.10 -0.22 0.97_* 0.02 0.01
## 270 -0.03 0.05 -0.03 0.06 1.03_* 0.00 0.02
## 298 -0.06 0.06 -0.09 -0.15 0.97_* 0.01 0.00
## 314 -0.05 0.04 0.02 -0.05 1.03_* 0.00 0.02_*
## 353 -0.02 0.03 0.09 0.15 0.97_* 0.01 0.00
## 357 0.02 -0.02 0.02 -0.03 1.03_* 0.00 0.02
## 368 0.26 -0.23 -0.11 0.27_* 1.01 0.02 0.02_*
## 377 0.14 -0.15 0.12 0.24 0.95_* 0.02 0.01
## 384 0.00 0.00 0.00 0.00 1.02_* 0.00 0.02
## 387 -0.03 0.04 -0.03 0.05 1.02_* 0.00 0.02
## 396 -0.05 0.05 0.08 0.14 0.98_* 0.01 0.00R points out a few observations that violate various rules for each influence measure. Typically, one can demonstrate these statistics and report both a regression with all data included and one with the outliers removed and compare.
Q12.
This problem involves simple linear regression without an intercept.
a.)
Recall that the coefficient estimate βˆ for the linear regression of Y onto X without an intercept is given by (3.38). Under what circumstance is the coefficient estimate for the regression of X onto Y the same as the coefficient estimate for the regression of Y onto X?
b.)
Generate an example in R with n = 100 observations in which the coefficient estimate for the regression of X onto Y is different from the coefficient estimate for the regression of Y onto X.
set.seed(1)
x <- 1:100
sum(x^2)## [1] 338350y <- 2 * x + rnorm(100, sd = 0.1)
sum(y^2)## [1] 1353606fit.Y <- lm(y ~ x + 0)
fit.X <- lm(x ~ y + 0)
summary(fit.Y)##
## Call:
## lm(formula = y ~ x + 0)
##
## Residuals:
## Min 1Q Median 3Q Max
## -0.223590 -0.062560 0.004426 0.058507 0.230926
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## x 2.0001514 0.0001548 12920 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 0.09005 on 99 degrees of freedom
## Multiple R-squared: 1, Adjusted R-squared: 1
## F-statistic: 1.669e+08 on 1 and 99 DF, p-value: < 2.2e-16summary(fit.X)##
## Call:
## lm(formula = x ~ y + 0)
##
## Residuals:
## Min 1Q Median 3Q Max
## -0.115418 -0.029231 -0.002186 0.031322 0.111795
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## y 5.00e-01 3.87e-05 12920 <2e-16 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 0.04502 on 99 degrees of freedom
## Multiple R-squared: 1, Adjusted R-squared: 1
## F-statistic: 1.669e+08 on 1 and 99 DF, p-value: < 2.2e-16c.)
Generate an example in R with n = 100 observations in which the coefficient estimate for the regression of X onto Y is the same as the coefficient estimate for the regression of Y onto X
x <- 1:100
sum(x^2)## [1] 338350y <- 100:1
sum(y^2)## [1] 338350fit.Y <- lm(y ~ x + 0)
fit.X <- lm(x ~ y + 0)
summary(fit.Y)##
## Call:
## lm(formula = y ~ x + 0)
##
## Residuals:
## Min 1Q Median 3Q Max
## -49.75 -12.44 24.87 62.18 99.49
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## x 0.5075 0.0866 5.86 6.09e-08 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 50.37 on 99 degrees of freedom
## Multiple R-squared: 0.2575, Adjusted R-squared: 0.25
## F-statistic: 34.34 on 1 and 99 DF, p-value: 6.094e-08summary(fit.X)##
## Call:
## lm(formula = x ~ y + 0)
##
## Residuals:
## Min 1Q Median 3Q Max
## -49.75 -12.44 24.87 62.18 99.49
##
## Coefficients:
## Estimate Std. Error t value Pr(>|t|)
## y 0.5075 0.0866 5.86 6.09e-08 ***
## ---
## Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
##
## Residual standard error: 50.37 on 99 degrees of freedom
## Multiple R-squared: 0.2575, Adjusted R-squared: 0.25
## F-statistic: 34.34 on 1 and 99 DF, p-value: 6.094e-08