| 2016-07-08 |
1_S |
Replaced the data logger at 9:33 |
62.300000000000004 |
67 |
| 2016-07-08 |
10_S |
This well was partially pulled from the ground. I stuck it back in the hole and measured water depth the next day. |
20.5 |
55 |
| 2016-07-08 |
11_S |
This well was partially pulled from the ground. I stuck it back in the hole and measured water depth the next day. |
21.1 |
45.5 |
| 2016-07-08 |
12_S |
This well was partially pulled from the ground. I stuck it back in the hole and measured water depth the next day. |
9.5 |
44.1 |
| 2016-07-08 |
13_S |
This well was partially pulled from the ground. I stuck it back in the hole and measured water depth the next day. |
24 |
48.4 |
| 2016-07-08 |
14_S |
This well was pulled from the ground. I stuck it back in the hole and measured water depth the next day. Not enough water had flowed back into the well the following morning to be able to collect water with the bailer. pH and EC was measured by lowering the electrodes into the well. |
14.1 |
93.2 |
| 2016-07-08 |
2_S |
Replaced the data logger at 9:53 |
44 |
71.7 |
| 2016-07-08 |
4_S |
Replaced the data logger at 10:42 |
29.2 |
44 |
| 2016-07-08 |
6_S |
This well was partially pulled up by a hooligan. I pushed it back so that the marker line (marking ground level) was once again flush with the ground and then measured the water depth at that time, as well as the following day. The difference was negligibile (initially 42.4/14/122) |
14 |
42.4 |
| 2016-07-08 |
7_S |
This well was pulled from the ground. I stuck it back in the hole and measured water depth the next day. This is a lagg well, with saturated soils and standing water around it. The water level in the well seems to deep and may be a result of not having refilled sufficiently from the previous day. |
19.399999999999999 |
55.8 |
| 2016-07-08 |
9_S |
This well was partially pulled from the ground. I stuck it back in the hole and measured water depth the next day. |
26.3 |
73 |
| 2016-09-21 |
1_S |
Replaced data logger at 10:05 |
59 |
65 |
| 2016-09-21 |
14_S |
No water depth measurement this time (vandalism) |
NA |
NA |
| 2016-09-21 |
15_S |
Rediscovered this trip |
49.5 |
71.754999999999995 |
| 2016-09-21 |
2_S |
Pushed peat back down around base of well; Replaced data logger at 10:20 |
41.8 |
71.450199999999995 |
| 2016-09-21 |
4_S |
Replaced data logger at 10:43 |
29.8 |
41.274999999999999 |
| 2016-09-21 |
6_S |
Replaced yesterday (9/20) after vandalism; Some PVC shreds in the H2O sample; 1st measure of EC registered 119.6 |
23.4 |
81.915000000000006 |
| 2017-01-18 |
1_S |
Logger removed from well 1/17 13:22 to 1/18 10:20 and 1/18 13:10 to 13:13; Measurements done with english-unit tape and then converted to metric. |
61.912500000000001 |
66.674999999999997 |
| 2017-01-18 |
4_S |
pH was 4.76 when probe was not swirled; Measurements done with english-unit tape and then converted to metric. |
21.11375 |
21.59 |
| 2017-01-18 |
5_S |
pH was 4.15 when probe was not swirled; Measurements done with english-unit tape and then converted to metric. |
38.417500000000004 |
41.592500000000001 |
| 2017-01-18 |
6_S |
pH was 4.53 when probe was not swirled; Measurements done with english-unit tape and then converted to metric. |
21.907499999999999 |
36.353749999999998 |
| 2017-01-18 |
7_S |
pH was 4.55 when probe was not swirled; Measurements done with english-unit tape and then converted to metric. |
22.463125000000002 |
17.383125 |
| 2017-01-18 |
8_S |
pH was 5.07 when probe was not swirled; Measurements done with english-unit tape and then converted to metric. |
35.2425 |
48.895000000000003 |
| 2017-01-19 |
14_S |
Hidden beneath moss because of hooligans; Measurements done with english-unit tape and then converted to metric. |
7.4612499999999997 |
27.305 |
| 2017-01-18 |
12_S |
pH was 4.74 when probe was not swirled; Measurements done with english-unit tape and then converted to metric. |
3.81 |
2.9368750000000001 |
| 2017-01-18 |
15_S |
Remeasure total depth in the spring, may have been ice in the well; Measurements done with english-unit tape and then converted to metric. |
48.577500000000001 |
59.848750000000003 |
| 2017-04-25 |
1_S |
Original measures were 4.91 pH and 15.64 EC; Remeasured after doing well 2 and noticed funky setting on meter |
60.1 |
60.1 |
| 2017-04-25 |
7_S |
Standing water |
19 |
14 |
| 2017-07-06 |
2_S |
42.9 cm to line on well |
44.8 |
78 |
| 2017-07-06 |
3_S |
lines redrawn |
12.8 |
54 |
| 2017-07-06 |
4_S |
line redrawn |
24 |
47 |
| 2017-07-06 |
5_S |
line redrawn |
40.6 |
63.7 |
| 2017-07-06 |
6_S |
line redrawn |
19.8 |
51.1 |
| 2017-07-06 |
7_S |
Lid appears to have been kicked off by elk, so the well was also loose in the hole; filled the gap around the well after measuring |
21.9 |
30.5 |
| 2017-07-06 |
8_S |
35.7 cm to line |
36.5 |
75.400000000000006 |
| 2017-07-06 |
14_S |
line redrawn |
6.2 |
43.4 |
| 2017-07-06 |
12_S |
line redrawn |
3.2 |
33 |
| 2017-07-06 |
11_S |
line redrawn |
9.6999999999999993 |
46.9 |
| 2017-07-06 |
10_S |
line redrawn |
7 |
52.6 |
| 2017-07-06 |
9_S |
line redrawn |
16.5 |
68.099999999999994 |
| 2017-07-06 |
13_S |
line redrawn |
25.5 |
64.5 |
| 2017-07-06 |
15_S |
line redrawn |
48.1 |
84.6 |
| 2017-08-29 |
1_S |
This well was dry, no sample was collected; Used top loop of string for the logger; Troll removed at 12:10 8/28 and replaced 9:09 8/29 |
NA |
DRY |
| 2017-08-29 |
2_S |
Did not bail the suggested volume (ran out of H20); Collected 1/2 samples due to limited water; Measured EC & pH in between non-acid and acid samples; Troll removed at 12:15 8/28 and replaced 9:16 8/29 |
46.4 |
113.8 |
| 2017-08-29 |
4_S |
Troll removed at 12:48 8/28 and replaced 9:32 8/29 |
26.9 |
81.7 |
| 2017-08-29 |
7_S |
This well was dry, no sample was collected |
NA |
DRY |
| 2017-08-29 |
8_S |
This well was dry, no sample was collected |
NA |
DRY |
| 2017-08-29 |
14_S |
This well was in place, but someone/thing dug around it again and removed the cap. The stick-up was measured to the nearby ground (not the surface immediately surrounding it, because it had been dug out; Bailed the well dry, but did not get the calculated volume; 1/2 sample due to limited water, measured EC and pH before bottling |
7.2 |
73 |
| 2017-08-29 |
12_S |
Stick up is 12.9 to current surface, but 4.4 to the line drawn on the pipe; Moss has either subsided or the well has been messed with. Bailed the well dry, but did not get the calculated volume |
12.9 |
59 |
| 2017-08-29 |
11_S |
Bailed the well dry, but did not get the calculated volume |
11.5 |
76.2 |
| 2017-08-29 |
10_S |
Bailed the well dry, but did not get the calculated volume |
8.6999999999999993 |
57.8 |
| 2017-08-29 |
13_S |
1/2 sample due to limited water, measured EC and pH before bottling |
27 |
102.1 |
| 2018-01-18 |
1_S |
Used top loop in string for replacing TROLL |
62.4 |
63.5 |
| 2018-01-18 |
4_S |
Original ec reading was 150+. Recalibrated and got the number here. |
23.5 |
28.6 |
| 2018-01-18 |
5_S |
Disturbed slightly (very slightly angled); cap was off when we arrived; remeasured 1/18 but got very similar depth (44.0) |
41.3 |
47.6 |
| 2018-01-18 |
7_S |
Cap was off when arrived |
18.100000000000001 |
14.6 |
| 2018-01-18 |
14_S |
Cap was off (and missing) when arrived. This well is in a shallow concavity now, since all of the previous disturbance and subsidence. Stick up is only 6.1 cm to surrounding area, but 12.7 immediately next to the well. |
12.7 |
25.2 |
| 2018-01-18 |
12_S |
Uneven surface around well, measured @ line |
9.6999999999999993 |
6.6 |
| 2018-01-18 |
9_S |
Calibrated ec (1413), but was immediately 1480 when measured again. Many of these ec readings at WTC seem high. |
16 |
54 |
| 2018-01-18 |
15_S |
Cap off when arrived, slightly pulled up. |
48.8 |
64 |
| 2018-04-18 |
1_S |
Logger replaced 4/19 9:27 |
61.2 |
61.8 |
| 2018-04-18 |
2_S |
Logger replaced 4/19 9:37 |
43.7 |
54.8 |
| 2018-04-18 |
4_S |
Logger replaced 4/19 10:27 |
22.4 |
25.3 |
| 2018-04-18 |
7_S |
Water above surface |
17.7 |
17 |
| 2018-04-18 |
14_S |
5.8 cm to old line, nearly flush w/ surrounding surface |
12.8 |
24.2 |
| 2018-04-18 |
12_S |
Measured on marked side. Only 2 cm to surrounding surface area (marked side is in depression). |
9.5 |
9.1999999999999993 |
| 2019-04-09 |
1_S |
*Well had been disturbed when I arrived. It was pushed over and slightly pulled up. When I arrived, the top of the pipe was 56.5 cm directly above the water surface and 58 cm if following the side of the pipe, the stick up was 59.5 vertically and 61 cm if following the side of the pipe. I straightened the pipe & filled in around it and remeasured. Those numbers are presented in the Depth to Water and Stickup columns, but the numbers here should be used if checking/calibrating the data logger. Logger replaced at 14:17 |
60.5 |
60 |
| 2019-04-09 |
2_S |
Well had been disturbed. Pushed over at a slight angle. I straightened it slightly and filled in the gap that had been created at the base. Not enough to meaningfully impact the logger readings. Logger replaced at 14:19 |
43 |
52 |
| 2019-04-09 |
4_S |
Cap was off of shallow well when I arrived; Logger replaced at 9:30 on 4/10 |
25 |
23 |
| 2019-04-09 |
5_S |
Baro collected 11:34 and replaced at 9:35 on 4/10; Some peat removed around base of shallow well by hoodlums--I replaced it. |
41.5 |
44.5 |
| 2019-04-09 |
6_S |
Shallow well was pulled up somewhat and excavated around the base. I filled in the hole at the base and measured the stickup to this new surface. |
21 |
35 |
| 2019-04-09 |
7_S |
Well pulled up and on the ground when I arrived. I replaced it and measured new stickup value. |
25.5 |
18 |
| 2019-04-09 |
14_S |
Cap was off when I arrived. I filled in the soil subsidence around this well. |
9 |
23 |
| 2019-04-09 |
12_S |
Well was pulled up slightly when I arrived. I pused it back in before measuring. |
9 |
14.5 |