Objectives

The objectives of this problem set is to orient you to a number of activities in R. And to conduct a thoughtful exercise in appreciating the importance of data visualization. For each question create a code chunk or text response that completes/answers the activity or question requested. Finally, upon completion name your final output .html file as: YourName_ANLY512-Section-Year-Semester.html and upload it to the “Problem Set 2” assignment on Moodle. Points will be deducted for uploading the improper format.

Questions

  1. Anscombes quartet is a set of 4 \(x,y\) data sets that were published by Francis Anscombe in a 1973 paper Graphs in statistical analysis. For this first question load the anscombe data that is part of the library(datasets) in R. And assign that data to a new object called data.
library("datasets")
data <- anscombe
  1. Summarise the data by calculating the mean, variance, for each column and the correlation between each pair (eg. x1 and y1, x2 and y2, etc) (Hint: use the fBasics() package!)
library("fBasics")
## Warning: package 'fBasics' was built under R version 3.4.4
## Loading required package: timeDate
## Warning: package 'timeDate' was built under R version 3.4.2
## Loading required package: timeSeries
## Warning: package 'timeSeries' was built under R version 3.4.4
basicStats(data)
##                    x1        x2        x3        x4        y1        y2
## nobs        11.000000 11.000000 11.000000 11.000000 11.000000 11.000000
## NAs          0.000000  0.000000  0.000000  0.000000  0.000000  0.000000
## Minimum      4.000000  4.000000  4.000000  8.000000  4.260000  3.100000
## Maximum     14.000000 14.000000 14.000000 19.000000 10.840000  9.260000
## 1. Quartile  6.500000  6.500000  6.500000  8.000000  6.315000  6.695000
## 3. Quartile 11.500000 11.500000 11.500000  8.000000  8.570000  8.950000
## Mean         9.000000  9.000000  9.000000  9.000000  7.500909  7.500909
## Median       9.000000  9.000000  9.000000  8.000000  7.580000  8.140000
## Sum         99.000000 99.000000 99.000000 99.000000 82.510000 82.510000
## SE Mean      1.000000  1.000000  1.000000  1.000000  0.612541  0.612568
## LCL Mean     6.771861  6.771861  6.771861  6.771861  6.136083  6.136024
## UCL Mean    11.228139 11.228139 11.228139 11.228139  8.865735  8.865795
## Variance    11.000000 11.000000 11.000000 11.000000  4.127269  4.127629
## Stdev        3.316625  3.316625  3.316625  3.316625  2.031568  2.031657
## Skewness     0.000000  0.000000  0.000000  2.466911 -0.048374 -0.978693
## Kurtosis    -1.528926 -1.528926 -1.528926  4.520661 -1.199123 -0.514319
##                    y3        y4
## nobs        11.000000 11.000000
## NAs          0.000000  0.000000
## Minimum      5.390000  5.250000
## Maximum     12.740000 12.500000
## 1. Quartile  6.250000  6.170000
## 3. Quartile  7.980000  8.190000
## Mean         7.500000  7.500909
## Median       7.110000  7.040000
## Sum         82.500000 82.510000
## SE Mean      0.612196  0.612242
## LCL Mean     6.135943  6.136748
## UCL Mean     8.864057  8.865070
## Variance     4.122620  4.123249
## Stdev        2.030424  2.030579
## Skewness     1.380120  1.120774
## Kurtosis     1.240044  0.628751
cor(data$x1,data$y1)
## [1] 0.8164205
cor(data$x2,data$y2)
## [1] 0.8162365
cor(data$x3,data$y3)
## [1] 0.8162867
cor(data$x4,data$y4)
## [1] 0.8165214
cor(data)
##            x1         x2         x3         x4         y1         y2
## x1  1.0000000  1.0000000  1.0000000 -0.5000000  0.8164205  0.8162365
## x2  1.0000000  1.0000000  1.0000000 -0.5000000  0.8164205  0.8162365
## x3  1.0000000  1.0000000  1.0000000 -0.5000000  0.8164205  0.8162365
## x4 -0.5000000 -0.5000000 -0.5000000  1.0000000 -0.5290927 -0.7184365
## y1  0.8164205  0.8164205  0.8164205 -0.5290927  1.0000000  0.7500054
## y2  0.8162365  0.8162365  0.8162365 -0.7184365  0.7500054  1.0000000
## y3  0.8162867  0.8162867  0.8162867 -0.3446610  0.4687167  0.5879193
## y4 -0.3140467 -0.3140467 -0.3140467  0.8165214 -0.4891162 -0.4780949
##            y3         y4
## x1  0.8162867 -0.3140467
## x2  0.8162867 -0.3140467
## x3  0.8162867 -0.3140467
## x4 -0.3446610  0.8165214
## y1  0.4687167 -0.4891162
## y2  0.5879193 -0.4780949
## y3  1.0000000 -0.1554718
## y4 -0.1554718  1.0000000
  1. Create scatter plots for each \(x, y\) pair of data.
plot(data$x1,data$y1)

plot(data$x2,data$y2)

plot(data$x3,data$y3)

plot(data$x4,data$y4)

  1. Now change the symbols on the scatter plots to solid circles and plot them together as a 4 panel graphic
par(mfrow=c(2,2))
plot(data$x1,data$y1,pch=20)
plot(data$x2,data$y2,pch=20)
plot(data$x3,data$y3,pch=20)
plot(data$x4,data$y4,pch=20)

  1. Now fit a linear model to each data set using the lm() function.
lm(data$y1 ~ data$x1)
## 
## Call:
## lm(formula = data$y1 ~ data$x1)
## 
## Coefficients:
## (Intercept)      data$x1  
##      3.0001       0.5001
lm(data$y2 ~ data$x2)
## 
## Call:
## lm(formula = data$y2 ~ data$x2)
## 
## Coefficients:
## (Intercept)      data$x2  
##       3.001        0.500
lm(data$y3 ~ data$x3)
## 
## Call:
## lm(formula = data$y3 ~ data$x3)
## 
## Coefficients:
## (Intercept)      data$x3  
##      3.0025       0.4997
lm(data$y4 ~ data$x4)
## 
## Call:
## lm(formula = data$y4 ~ data$x4)
## 
## Coefficients:
## (Intercept)      data$x4  
##      3.0017       0.4999
  1. Now combine the last two tasks. Create a four panel scatter plot matrix that has both the data points and the regression lines. (hint: the model objects will carry over chunks!)
par(mfrow=c(2,2))
plot(data$x1,data$y1,pch=20)
abline(lm(data$y1 ~ data$x1))
plot(data$x2,data$y2,pch=20)
abline(lm(data$y2 ~ data$x2))
plot(data$x3,data$y3,pch=20)
abline(lm(data$y3 ~ data$x3))
plot(data$x4,data$y4,pch=20)
abline(lm(data$y4 ~ data$x4))

  1. Now compare the model fits for each model object.
summary(lm(data$y1 ~ data$x1))

Call: lm(formula = data\(y1 ~ data\)x1)

Residuals: Min 1Q Median 3Q Max -1.92127 -0.45577 -0.04136 0.70941 1.83882

Coefficients: Estimate Std. Error t value Pr(>|t|)
(Intercept) 3.0001 1.1247 2.667 0.02573 * data$x1 0.5001 0.1179 4.241 0.00217 ** — Signif. codes: 0 ‘’ 0.001 ’’ 0.01 ’’ 0.05 ‘.’ 0.1 ‘’ 1

Residual standard error: 1.237 on 9 degrees of freedom Multiple R-squared: 0.6665, Adjusted R-squared: 0.6295 F-statistic: 17.99 on 1 and 9 DF, p-value: 0.00217

summary(lm(data$y2 ~ data$x2))

Call: lm(formula = data\(y2 ~ data\)x2)

Residuals: Min 1Q Median 3Q Max -1.9009 -0.7609 0.1291 0.9491 1.2691

Coefficients: Estimate Std. Error t value Pr(>|t|)
(Intercept) 3.001 1.125 2.667 0.02576 * data$x2 0.500 0.118 4.239 0.00218 ** — Signif. codes: 0 ‘’ 0.001 ’’ 0.01 ’’ 0.05 ‘.’ 0.1 ‘’ 1

Residual standard error: 1.237 on 9 degrees of freedom Multiple R-squared: 0.6662, Adjusted R-squared: 0.6292 F-statistic: 17.97 on 1 and 9 DF, p-value: 0.002179

summary(lm(data$y3 ~ data$x3))

Call: lm(formula = data\(y3 ~ data\)x3)

Residuals: Min 1Q Median 3Q Max -1.1586 -0.6146 -0.2303 0.1540 3.2411

Coefficients: Estimate Std. Error t value Pr(>|t|)
(Intercept) 3.0025 1.1245 2.670 0.02562 * data$x3 0.4997 0.1179 4.239 0.00218 ** — Signif. codes: 0 ‘’ 0.001 ’’ 0.01 ’’ 0.05 ‘.’ 0.1 ‘’ 1

Residual standard error: 1.236 on 9 degrees of freedom Multiple R-squared: 0.6663, Adjusted R-squared: 0.6292 F-statistic: 17.97 on 1 and 9 DF, p-value: 0.002176

summary(lm(data$y4 ~ data$x4))

Call: lm(formula = data\(y4 ~ data\)x4)

Residuals: Min 1Q Median 3Q Max -1.751 -0.831 0.000 0.809 1.839

Coefficients: Estimate Std. Error t value Pr(>|t|)
(Intercept) 3.0017 1.1239 2.671 0.02559 * data$x4 0.4999 0.1178 4.243 0.00216 ** — Signif. codes: 0 ‘’ 0.001 ’’ 0.01 ’’ 0.05 ‘.’ 0.1 ‘’ 1

Residual standard error: 1.236 on 9 degrees of freedom Multiple R-squared: 0.6667, Adjusted R-squared: 0.6297 F-statistic: 18 on 1 and 9 DF, p-value: 0.002165

  1. In text, summarize the lesson of Anscombe’s Quartet and what it says about the value of data visualization.

Anscombe data consists of 8 variables with 11 observations. In this data set there are four datasets (x1,y1…..x4,y4). To understand the relationship and build models with these four pairs of data sets we need to first visualize these data points by using statistics and scatterplot which can show us how actual data values are distributed. Scatterplot show all data sets are different but model statistics show almost same adjusted R square.Therefore, visulization is necessary to differentiate between the datasets.