Introduction

In Part 1, we introduced the logistic model, the logit transformation, and the connection between logistic regression coefficients and odds ratios. We fit simple logistic regression models with single predictors and previewed multiple logistic regression.

In Part 2, we go deeper:

Multiple logistic regression with adjusted odds ratios for confounder control
Maximum likelihood estimation and the Wald and likelihood ratio tests
Confidence intervals for adjusted odds ratios
Interaction terms in logistic regression and effect modification
Goodness-of-fit: deviance, Hosmer-Lemeshow test, pseudo-R²
Model discrimination: ROC curves and the area under the curve (AUC)
Diagnostics: residuals, influential observations, and linearity in the logit

Textbook reference: Kleinbaum et al., Chapter 22 (Sections 22.4 and 22.5)

Setup and Data

library(tidyverse)
library(haven)
library(janitor)
library(knitr)
library(kableExtra)
library(broom)
library(gtsummary)
library(car)
library(ggeffects)
library(ResourceSelection)  
library(pROC)               
library(performance)        
library(sjPlot)
library(modelsummary)
library(gridExtra)
library(plotly)

options(gtsummary.use_ftExtra = TRUE)
set_gtsummary_theme(theme_gtsummary_compact(set_theme = TRUE))

brfss_full <- read_xpt('/Users/samriddhi/Downloads/LLCP2020.XPT ') |>
  clean_names()

brfss_logistic <- brfss_full |>
  mutate(
    # Binary outcome: frequent mental distress (>= 14 days)
    menthlth_days = case_when(
      menthlth == 88                  ~ 0,
      menthlth >= 1 & menthlth <= 30 ~ as.numeric(menthlth),
      TRUE                           ~ NA_real_
    ),
    fmd = factor(
      ifelse(menthlth_days >= 14, 1, 0),
      levels = c(0, 1),
      labels = c("No", "Yes")
    ),
    # Predictors
    physhlth_days = case_when(
      physhlth == 88                  ~ 0,
      physhlth >= 1 & physhlth <= 30 ~ as.numeric(physhlth),
      TRUE                           ~ NA_real_
    ),
    sleep_hrs = case_when(
      sleptim1 >= 1 & sleptim1 <= 14 ~ as.numeric(sleptim1),
      TRUE                           ~ NA_real_
    ),
    age = age80,
    sex = factor(sexvar, levels = c(1, 2), labels = c("Male", "Female")),
    bmi = ifelse(bmi5 > 0, bmi5 / 100, NA_real_),
    exercise = factor(case_when(
      exerany2 == 1 ~ "Yes",
      exerany2 == 2 ~ "No",
      TRUE          ~ NA_character_
    ), levels = c("No", "Yes")),
    income_cat = case_when(
      income2 %in% 1:8 ~ as.numeric(income2),
      TRUE             ~ NA_real_
    ),
    smoker = factor(case_when(
      smokday2 %in% c(1, 2) ~ "Current",
      smokday2 == 3          ~ "Former/Never",
      TRUE                   ~ NA_character_
    ), levels = c("Former/Never", "Current"))
  ) |>
  filter(
    !is.na(fmd), !is.na(physhlth_days), !is.na(sleep_hrs),
    !is.na(age), age >= 18, !is.na(sex), !is.na(bmi),
    !is.na(exercise), !is.na(income_cat), !is.na(smoker)
  )

set.seed(1220)
brfss_logistic <- brfss_logistic |>
  dplyr::select(fmd, menthlth_days, physhlth_days, sleep_hrs, age, sex,
                bmi, exercise, income_cat, smoker) |>
  slice_sample(n = 5000) |>
  mutate(fmd_num = as.numeric(fmd == "Yes"))

dim(brfss_logistic)

## [1] 5000   11

Outcome: fmd — Frequent Mental Distress (1 = 14+ mentally unhealthy days in past 30, 0 = otherwise).

Part 1: Multiple Logistic Regression

The Adjusted Model

We extend the simple model to include several predictors:

\[\text{logit}[\Pr(Y = 1)] = \beta_0 + \beta_1 X_1 + \beta_2 X_2 + \cdots + \beta_k X_k\]

Each coefficient \(\beta_j\) represents the change in log-odds for a one-unit increase in \(X_j\), holding all other predictors constant. Exponentiating gives the adjusted odds ratio:

\[\text{aOR}_j = e^{\beta_j}\]

mod_full <- glm(
  fmd ~ exercise + smoker + age + sex + sleep_hrs + income_cat + bmi + physhlth_days,
  data = brfss_logistic,
  family = binomial(link = "logit")
)

mod_full |>
  tbl_regression(
    exponentiate = TRUE,
    label = list(
      exercise      ~ "Exercise (past 30 days)",
      smoker        ~ "Smoking status",
      age           ~ "Age (per year)",
      sex           ~ "Sex",
      sleep_hrs     ~ "Sleep hours",
      income_cat    ~ "Income category (per unit)",
      bmi           ~ "BMI",
      physhlth_days ~ "Physically unhealthy days"
    )
  ) |>
  bold_labels() |>
  bold_p()

Characteristic	OR	95% CI	p-value
Exercise (past 30 days)
No	—	—
Yes	0.82	0.68, 0.99	0.041
Smoking status
Former/Never	—	—
Current	1.30	1.09, 1.56	0.004
Age (per year)	0.97	0.96, 0.97	<0.001
Sex
Male	—	—
Female	1.68	1.41, 1.98	<0.001
Sleep hours	0.86	0.81, 0.90	<0.001
Income category (per unit)	0.91	0.87, 0.95	<0.001
BMI	1.01	0.99, 1.02	0.4
Physically unhealthy days	1.06	1.06, 1.07	<0.001
Abbreviations: CI = Confidence Interval, OR = Odds Ratio

Interpretation: Each row gives the adjusted odds ratio (aOR) and 95% CI for one predictor, controlling for all others. For example, the aOR for current smoking compares the odds of frequent mental distress for current smokers vs. former/never smokers, after adjusting for age, sex, sleep, income, BMI, exercise, and physical health. An aOR > 1 indicates a risk factor; an aOR < 1 indicates a protective factor.

Scaling Continuous Predictors

A 1-year change in age or a 1-unit change in BMI is rarely the most clinically meaningful comparison. We can rescale to improve interpretation:

mod_scaled <- glm(
  fmd ~ exercise + smoker + I(age/10) + sex + sleep_hrs +
        income_cat + I(bmi/5) + physhlth_days,
  data = brfss_logistic,
  family = binomial
)

mod_scaled |>
  tbl_regression(
    exponentiate = TRUE,
    label = list(
      "I(age/10)"  ~ "Age (per 10 years)",
      "I(bmi/5)"   ~ "BMI (per 5 units)"
    )
  ) |>
  bold_labels()

Characteristic	OR	95% CI	p-value
exercise
No	—	—
Yes	0.82	0.68, 0.99	0.041
smoker
Former/Never	—	—
Current	1.30	1.09, 1.56	0.004
Age (per 10 years)	0.73	0.69, 0.77	<0.001
sex
Male	—	—
Female	1.68	1.41, 1.98	<0.001
sleep_hrs	0.86	0.81, 0.90	<0.001
income_cat	0.91	0.87, 0.95	<0.001
BMI (per 5 units)	1.03	0.97, 1.10	0.4
physhlth_days	1.06	1.06, 1.07	<0.001
Abbreviations: CI = Confidence Interval, OR = Odds Ratio

Interpretation: Now the aOR for age compares two individuals 10 years apart, and the aOR for BMI compares two individuals 5 BMI units apart, both more clinically interpretable.

Part 2: Maximum Likelihood Estimation and Hypothesis Tests

Maximum Likelihood Estimation (ML)

Unlike linear regression, which uses ordinary least squares, logistic regression coefficients are estimated by maximum likelihood. The algorithm finds the values of \(\beta_0, \beta_1, \ldots, \beta_k\) that maximize the likelihood of observing the data.

The likelihood function for \(n\) independent binary observations is:

\[L(\boldsymbol{\beta}) = \prod_{i=1}^{n} p_i^{y_i}(1 - p_i)^{1 - y_i}\]

where \(p_i = \Pr(Y_i = 1 \mid X_i)\) is the predicted probability for observation \(i\). Taking the log gives the log-likelihood:

\[\ln L(\boldsymbol{\beta}) = \sum_{i=1}^{n} \left[y_i \ln p_i + (1 - y_i) \ln(1 - p_i)\right]\]

The ML estimates \(\hat{\beta}\) are obtained iteratively (typically by Newton-Raphson). We never compute these by hand, but it is important to know that R’s glm() reports Deviance \(= -2 \ln \hat{L}\), which is the foundation for hypothesis testing.

Wald Test (z-test for individual coefficients)

The Wald test is the default test reported by summary() and tidy(). For each coefficient \(\beta_j\):

\[z = \frac{\hat{\beta}_j}{\text{SE}(\hat{\beta}_j)} \sim N(0, 1) \text{ under } H_0: \beta_j = 0\]

The p-value tests whether the coefficient is significantly different from zero, equivalently whether the OR is significantly different from 1.

tidy(mod_full, conf.int = TRUE, exponentiate = TRUE) |>
  mutate(across(c(estimate, std.error, statistic, conf.low, conf.high),
                \(x) round(x, 3)),
         p.value = format.pval(p.value, digits = 3)) |>
  kable(caption = "Wald Tests for Each Coefficient (Exponentiated)") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Wald Tests for Each Coefficient (Exponentiated)
term	estimate	std.error	statistic	p.value	conf.low	conf.high
(Intercept)	2.198	0.356	2.215	0.02675	1.095	4.414
exerciseYes	0.820	0.097	-2.044	0.04095	0.679	0.993
smokerCurrent	1.301	0.091	2.890	0.00386	1.088	1.555
age	0.969	0.003	-11.225	< 2e-16	0.963	0.974
sexFemale	1.675	0.086	5.975	2.30e-09	1.415	1.985
sleep_hrs	0.857	0.027	-5.643	1.67e-08	0.812	0.904
income_cat	0.909	0.020	-4.703	2.56e-06	0.873	0.946
bmi	1.006	0.006	0.932	0.35113	0.993	1.018
physhlth_days	1.065	0.004	15.634	< 2e-16	1.057	1.073

Caveat: The Wald test can be unreliable when sample sizes are small or when coefficients are large. The likelihood ratio test is generally preferred for these situations.

Likelihood Ratio Test (LR test)

The likelihood ratio test compares two nested models: a “full” model and a “reduced” model that drops one or more predictors. The test statistic is:

\[\text{LR} = -2(\ln \hat{L}_{\text{reduced}} - \ln \hat{L}_{\text{full}}) = D_{\text{reduced}} - D_{\text{full}}\]

Under \(H_0\) that the dropped predictors have no effect, LR follows a \(\chi^2\) distribution with degrees of freedom equal to the number of parameters dropped.

Example: Test the joint contribution of smoking and exercise

mod_reduced <- glm(
  fmd ~ age + sex + sleep_hrs + income_cat + bmi + physhlth_days,
  data = brfss_logistic,
  family = binomial
)

anova(mod_reduced, mod_full, test = "LRT") |>
  kable(digits = 3,
        caption = "LR Test: Does adding exercise + smoker improve the model?") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

LR Test: Does adding exercise + smoker improve the model?
Resid. Df	Resid. Dev	Df	Deviance	Pr(>Chi)
4993	3641.913	NA	NA	NA
4991	3628.474	2	13.439	0.001

Interpretation: The LR test gives a \(\chi^2\) statistic on 3 degrees of freedom (1 for exercise, 2 for smoker — but smoker has 2 levels so 1 dummy variable is created, making df = 2 here actually). A small p-value means the dropped variables jointly contribute to model fit.

Wald vs. LR test in practice

Aspect	Wald test	LR test
What it tests	Single coefficient or vector	Nested model comparison
Computational cost	Very fast	Requires fitting two models
Reliability with small samples	Less reliable	Generally preferred
Reported by R	`summary(model)`	`anova(m1, m2, test = "LRT")`

In large samples (like ours with n = 5,000), the two tests usually agree. In smaller samples or with extreme estimates, prefer the LR test.

Part 3: Confidence Intervals for Adjusted Odds Ratios

For the OR of a single coefficient, the 95% CI is computed on the log-odds scale and then exponentiated:

\[95\% \text{ CI for } e^{\beta_j} = \exp\left(\hat{\beta}_j \pm 1.96 \cdot \text{SE}(\hat{\beta}_j)\right)\]

This is the default approach used by confint() and tidy(..., conf.int = TRUE).

ci_table <- tidy(mod_full, conf.int = TRUE, exponentiate = TRUE) |>
  filter(term != "(Intercept)") |>
  dplyr::select(term, estimate, conf.low, conf.high) |>
  mutate(across(c(estimate, conf.low, conf.high), \(x) round(x, 3)))

ci_table |>
  kable(col.names = c("Predictor", "aOR", "95% CI Lower", "95% CI Upper"),
        caption = "Adjusted Odds Ratios with 95% CIs") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Adjusted Odds Ratios with 95% CIs
Predictor	aOR	95% CI Lower	95% CI Upper
exerciseYes	0.820	0.679	0.993
smokerCurrent	1.301	1.088	1.555
age	0.969	0.963	0.974
sexFemale	1.675	1.415	1.985
sleep_hrs	0.857	0.812	0.904
income_cat	0.909	0.873	0.946
bmi	1.006	0.993	1.018
physhlth_days	1.065	1.057	1.073

Forest Plot of Adjusted ORs

A forest plot is the standard way to visualize multiple ORs and their CIs:

ci_table |>
  ggplot(aes(x = estimate, y = reorder(term, estimate))) +
  geom_vline(xintercept = 1, linetype = "dashed", color = "red") +
  geom_point(size = 3, color = "steelblue") +
  geom_errorbarh(aes(xmin = conf.low, xmax = conf.high), height = 0.2,
                 color = "steelblue") +
  scale_x_log10() +
  labs(title = "Forest Plot of Adjusted Odds Ratios for Frequent Mental Distress",
       subtitle = "Reference line at OR = 1; log-scale x-axis",
       x = "Adjusted Odds Ratio (95% CI)", y = NULL) +
  theme_minimal()

Interpretation: Predictors whose CIs do not cross the dashed line at OR = 1 are statistically significantly associated with FMD at the 0.05 level. The log-scale x-axis ensures that ORs of 0.5 and 2.0 (which represent equally strong associations in opposite directions) appear equidistant from 1.

Part 4: Interaction (Effect Modification)

What Is Interaction in Logistic Regression?

Interaction (effect modification) occurs when the effect of one predictor on the outcome depends on the value of another predictor. In logistic regression, interaction is modeled by including a product term:

\[\text{logit}[\Pr(Y=1)] = \beta_0 + \beta_1 X_1 + \beta_2 X_2 + \beta_3 (X_1 \cdot X_2)\]

If \(\beta_3 \neq 0\), the OR for \(X_1\) depends on the value of \(X_2\).

Example: Does the effect of exercise differ by sex?

mod_interact <- glm(
  fmd ~ exercise * sex + age + smoker + sleep_hrs + income_cat,
  data = brfss_logistic,
  family = binomial
)

mod_interact |>
  tbl_regression(exponentiate = TRUE) |>
  bold_labels() |>
  bold_p()

Characteristic	OR	95% CI	p-value
exercise
No	—	—
Yes	0.61	0.47, 0.79	<0.001
sex
Male	—	—
Female	1.66	1.26, 2.21	<0.001
IMPUTED AGE VALUE COLLAPSED ABOVE 80	0.97	0.97, 0.98	<0.001
smoker
Former/Never	—	—
Current	1.25	1.05, 1.48	0.012
sleep_hrs	0.81	0.77, 0.86	<0.001
income_cat	0.85	0.82, 0.89	<0.001
exercise * sex
Yes * Female	1.00	0.71, 1.41	>0.9
Abbreviations: CI = Confidence Interval, OR = Odds Ratio

Testing the Interaction

mod_no_interact <- glm(
  fmd ~ exercise + sex + age + smoker + sleep_hrs + income_cat,
  data = brfss_logistic,
  family = binomial
)

anova(mod_no_interact, mod_interact, test = "LRT") |>
  kable(digits = 3,
        caption = "LR Test for Exercise × Sex Interaction") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

LR Test for Exercise × Sex Interaction
Resid. Df	Resid. Dev	Df	Deviance	Pr(>Chi)
4993	3870.197	NA	NA	NA
4992	3870.197	1	0	0.987

Interpretation: If the p-value for the LR test is small (< 0.05), the interaction is statistically significant: the effect of exercise differs by sex. If not, we can drop the interaction term and use the simpler main-effects model.

Visualizing the Interaction

ggpredict(mod_interact, terms = c("exercise", "sex")) |>
  plot() +
  labs(title = "Predicted Probability of FMD by Exercise and Sex",
       x = "Exercise", y = "Predicted Probability of FMD",
       color = "Sex") +
  theme_minimal()

Interpretation: If the lines are parallel, there is no interaction. If they cross or diverge, the effect of exercise differs across sex.

Stratified Odds Ratios

When an interaction is present, we report stratum-specific odds ratios rather than a single overall OR:

# Stratum-specific ORs from the interaction model
ggpredict(mod_interact, terms = c("exercise", "sex")) |>
  as_tibble() |>
  pivot_wider(id_cols = group, names_from = x, values_from = predicted) |>
  mutate(OR_yes_vs_no = (Yes / (1 - Yes)) / (No / (1 - No))) |>
  dplyr::select(Sex = group, OR_yes_vs_no) |>
  kable(digits = 3,
        col.names = c("Sex", "OR (Exercise: Yes vs. No)"),
        caption = "Stratum-Specific Odds Ratios for Exercise") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Stratum-Specific Odds Ratios for Exercise
Sex	OR (Exercise: Yes vs. No)
Male	0.612
Female	0.614

Part 5: Goodness-of-Fit

Deviance

The deviance of a logistic model is:

\[D = -2 \ln \hat{L}\]

It is analogous to the residual sum of squares in linear regression: smaller is better. By itself, the deviance is hard to interpret, but differences in deviance between nested models follow a \(\chi^2\) distribution and form the basis of the LR test.

glance(mod_full) |>
  dplyr::select(null.deviance, df.null, deviance, df.residual, AIC, BIC) |>
  kable(digits = 1, caption = "Model Fit Statistics") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Model Fit Statistics
null.deviance	df.null	deviance	df.residual	AIC	BIC
4251.3	4999	3628.5	4991	3646.5	3705.1

Quick check: The difference between null.deviance and deviance represents the improvement from adding all predictors to an intercept-only model. We can test this with an LR test on df.null - df.residual degrees of freedom.

Pseudo-R²

There is no exact analog of \(R^2\) for logistic regression, but several “pseudo-R²” measures exist. The most common is McFadden’s R²:

\[R^2_{\text{McFadden}} = 1 - \frac{\ln \hat{L}_{\text{full}}}{\ln \hat{L}_{\text{null}}}\]

Values between 0.2 and 0.4 are considered excellent fit.

performance::r2_mcfadden(mod_full)

## # R2 for Generalized Linear Regression
##        R2: 0.147
##   adj. R2: 0.146

Interpretation: McFadden’s R² should not be interpreted on the same scale as linear regression R². Values are typically much smaller (e.g., 0.1 may indicate a reasonable fit).

Hosmer-Lemeshow Test

The Hosmer-Lemeshow test assesses the agreement between predicted and observed event rates within deciles of predicted probability. A non-significant p-value indicates adequate fit.

hl_test <- hoslem.test(
  x = as.numeric(brfss_logistic$fmd) - 1,
  y = fitted(mod_full),
  g = 10
)

hl_test

## 
##  Hosmer and Lemeshow goodness of fit (GOF) test
## 
## data:  as.numeric(brfss_logistic$fmd) - 1, fitted(mod_full)
## X-squared = 8.9639, df = 8, p-value = 0.3453

Interpretation: A small p-value (< 0.05) suggests that the model does not fit well in some regions of predicted probability. With large samples (like ours), the Hosmer-Lemeshow test can be over-powered and detect trivial misfit. Always pair it with a calibration plot.

Calibration Plot

brfss_logistic |>
  mutate(pred_prob = fitted(mod_full),
         obs_outcome = as.numeric(fmd) - 1,
         decile = ntile(pred_prob, 10)) |>
  group_by(decile) |>
  summarise(
    mean_pred = mean(pred_prob),
    mean_obs  = mean(obs_outcome),
    .groups = "drop"
  ) |>
  ggplot(aes(x = mean_pred, y = mean_obs)) +
  geom_abline(slope = 1, intercept = 0, color = "red", linetype = "dashed") +
  geom_point(size = 3, color = "steelblue") +
  geom_line(color = "steelblue") +
  labs(title = "Calibration Plot: Observed vs. Predicted Probability of FMD",
       subtitle = "Points should fall on the dashed line for perfect calibration",
       x = "Mean Predicted Probability (within decile)",
       y = "Observed Proportion (within decile)") +
  theme_minimal()

Interpretation: A well-calibrated model has points lying close to the 45-degree line. Systematic departures suggest miscalibration: points above the line indicate the model under-predicts; points below indicate over-prediction.

Part 6: Discrimination — ROC Curve and AUC

While calibration assesses how well predicted probabilities match observed rates, discrimination assesses how well the model separates events from non-events.

The ROC curve plots sensitivity (true positive rate) against 1 − specificity (false positive rate) across all possible probability cutoffs.

The AUC (area under the ROC curve) summarizes discrimination:

AUC	Discrimination
0.5	No discrimination (chance)
0.6-0.7	Poor
0.7-0.8	Acceptable
0.8-0.9	Excellent
> 0.9	Outstanding

roc_obj <- roc(
  response = brfss_logistic$fmd,
  predictor = fitted(mod_full),
  levels = c("No", "Yes"),
  direction = "<"
)

auc_value <- auc(roc_obj)

ggroc(roc_obj, color = "steelblue", linewidth = 1.2) +
  geom_abline(slope = 1, intercept = 1, linetype = "dashed", color = "red") +
  labs(title = "ROC Curve for Frequent Mental Distress Model",
       subtitle = paste0("AUC = ", round(auc_value, 3)),
       x = "Specificity", y = "Sensitivity") +
  theme_minimal()

Interpretation: An AUC of approximately 0.75-0.80 indicates acceptable to excellent discrimination, meaning the model can distinguish between individuals with and without FMD reasonably well. Note that calibration and discrimination are distinct concepts: a model can have good discrimination but poor calibration, or vice versa.

Part 7: Diagnostics for Logistic Regression

Linearity in the Logit (for continuous predictors)

For continuous predictors, logistic regression assumes a linear relationship between the predictor and the log-odds. We can check this with a smoothed plot of the logit against the predictor.

brfss_logistic |>
  mutate(logit_pred = predict(mod_full, type = "link")) |>
  ggplot(aes(x = age, y = logit_pred)) +
  geom_point(alpha = 0.2, color = "steelblue") +
  geom_smooth(method = "loess", se = FALSE, color = "darkorange") +
  labs(title = "Linearity in the Logit: Age",
       x = "Age (years)", y = "Predicted Log-Odds (logit)") +
  theme_minimal()

Interpretation: A roughly linear loess curve supports the linearity assumption. A clearly curved pattern suggests we should add a quadratic term or use a spline.

Influential Observations

Cook’s distance and standardized residuals from logistic regression can be examined the same way as in linear regression:

brfss_logistic |>
  mutate(cooks_d = cooks.distance(mod_full),
         row_id = row_number()) |>
  ggplot(aes(x = row_id, y = cooks_d)) +
  geom_point(alpha = 0.4, color = "steelblue") +
  geom_hline(yintercept = 4 / nrow(brfss_logistic),
             linetype = "dashed", color = "red") +
  labs(title = "Cook's Distance for Logistic Regression Model",
       subtitle = "Red line: 4/n threshold",
       x = "Observation Index", y = "Cook's Distance") +
  theme_minimal()

Multicollinearity

VIFs work the same way as in linear regression:

vif(mod_full) |>
  as.data.frame() |>
  rownames_to_column("Predictor") |>
  kable(digits = 2, caption = "Variance Inflation Factors") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Variance Inflation Factors
Predictor	vif(mod_full)
exercise	1.13
smoker	1.12
age	1.17
sex	1.01
sleep_hrs	1.02
income_cat	1.14
bmi	1.03
physhlth_days	1.20

Rule of thumb: VIF > 5 (or 10) indicates problematic multicollinearity.

Part 8: Reporting Logistic Regression Results

A publication-quality logistic regression table should include:

Sample size and number of events
Adjusted odds ratios with 95% CIs
p-values for each coefficient
Model fit statistics (AIC or pseudo-R²) - (may declutter)
Discrimination metric (AUC) - (methodological purposes)

mod_full |>
  tbl_regression(
    exponentiate = TRUE,
    label = list(
      exercise      ~ "Exercise (past 30 days)",
      smoker        ~ "Smoking status",
      age           ~ "Age",
      sex           ~ "Sex",
      sleep_hrs     ~ "Sleep hours",
      income_cat    ~ "Income category",
      bmi           ~ "BMI",
      physhlth_days ~ "Physically unhealthy days"
    )
  ) |>
  add_glance_source_note(
    #include = c(nobs, AIC, BIC),
    include = everything(),
    label = list(nobs ~ "N", AIC ~ "AIC", BIC ~ "BIC")
  ) |>
  bold_labels() |>
  bold_p() |>
  modify_caption("**Adjusted Odds Ratios for Frequent Mental Distress, BRFSS 2020**")

**Adjusted Odds Ratios for Frequent Mental Distress, BRFSS 2020**
Characteristic	OR	95% CI	p-value
Exercise (past 30 days)
No	—	—
Yes	0.82	0.68, 0.99	0.041
Smoking status
Former/Never	—	—
Current	1.30	1.09, 1.56	0.004
Age	0.97	0.96, 0.97	<0.001
Sex
Male	—	—
Female	1.68	1.41, 1.98	<0.001
Sleep hours	0.86	0.81, 0.90	<0.001
Income category	0.91	0.87, 0.95	<0.001
BMI	1.01	0.99, 1.02	0.4
Physically unhealthy days	1.06	1.06, 1.07	<0.001
Abbreviations: CI = Confidence Interval, OR = Odds Ratio
Null deviance = 4,251; Null df = 4,999; Log-likelihood = -1,814; AIC = 3,646; BIC = 3,705; Deviance = 3,628; Residual df = 4,991; N = 5,000

Summary

Concept	Tool / R function
Multiple logistic regression	`glm(y ~ x1 + x2 + ..., family = binomial)`
Adjusted odds ratios	`tidy(model, exponentiate = TRUE)`
Wald test	Default in `summary()` and `tidy()`
Likelihood ratio test	`anova(reduced, full, test = "LRT")`
Confidence intervals	`confint(model)` (profile CI) or `tidy(..., conf.int = TRUE)`
Interaction	`glm(y ~ x1 * x2, ...)`; test with LR test
Pseudo-R²	`performance::r2_mcfadden()`
Hosmer-Lemeshow	`ResourceSelection::hoslem.test()`
Calibration plot	Decile-based observed vs. predicted
ROC curve / AUC	`pROC::roc()` and `pROC::auc()`
Diagnostics	`cooks.distance()`, `vif()`, linearity plots
Publication table	`gtsummary::tbl_regression()`

Next Lecture (April 16)

Polytomous logistic regression: outcomes with > 2 nominal categories
Ordinal logistic regression: outcomes with > 2 ordered categories
Proportional odds assumption and how to test it

References

Kleinbaum, D. G., Kupper, L. L., Nizam, A., & Rosenberg, E. S. (2013). Applied Regression Analysis and Other Multivariable Methods (5th ed.), Chapter 22.
Hosmer, D. W., Lemeshow, S., & Sturdivant, R. X. (2013). Applied Logistic Regression (3rd ed.). Wiley.
Steyerberg, E. W. (2019). Clinical Prediction Models (2nd ed.). Springer.

Part 9: In-Class Lab Activity

EPI 553 — Logistic Regression Part 2 Lab
Due: End of class, April 14, 2026

Instructions

In this lab, you will build a multiple logistic regression model, conduct hypothesis tests, examine an interaction, and assess goodness-of-fit and discrimination. Use the same BRFSS 2020 logistic dataset from Part 1. Work through each task systematically. You may discuss concepts with classmates, but your written answers and R code must be your own.

Submission: Knit your .Rmd to HTML and upload to Brightspace by end of class.

Data for the Lab

Variable	Description	Type
`fmd`	Frequent mental distress (No/Yes)	Factor (outcome)
`menthlth_days`	Mentally unhealthy days (0–30)	Numeric
`physhlth_days`	Physically unhealthy days (0–30)	Numeric
`sleep_hrs`	Sleep hours per night (1–14)	Numeric
`age`	Age in years (capped at 80)	Numeric
`sex`	Sex (Male/Female)	Factor
`bmi`	Body mass index	Numeric
`exercise`	Exercised in past 30 days (No/Yes)	Factor
`income_cat`	Household income category (1–8)	Numeric
`smoker`	Former/Never vs. Current	Factor

# Data already loaded above as brfss_logistic
# Confirming dimensions
dim(brfss_logistic)

## [1] 5000   11

Task 1: Build a Multiple Logistic Regression Model (15 points)

1a. (5 pts) Fit a multiple logistic regression model predicting fmd from at least 5 predictors of your choice.

mod_lab_full <- glm(
  fmd ~ sleep_hrs + exercise + smoker + sex + income_cat + physhlth_days,
  data   = brfss_logistic,
  family = binomial(link = "logit")
)

tidy(mod_lab_full, conf.int = TRUE, exponentiate = FALSE) |>
  mutate(across(where(is.numeric), ~ round(.x, 3))) |>
  kable(caption = "Multiple Logistic Regression: FMD ~ 6 Predictors (Log-Odds Scale)") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Multiple Logistic Regression: FMD ~ 6 Predictors (Log-Odds Scale)
term	estimate	std.error	statistic	p.value	conf.low	conf.high
(Intercept)	-0.632	0.244	-2.592	0.010	-1.112	-0.155
sleep_hrs	-0.194	0.027	-7.206	0.000	-0.248	-0.142
exerciseYes	-0.091	0.094	-0.967	0.334	-0.273	0.094
smokerCurrent	0.505	0.087	5.801	0.000	0.334	0.675
sexFemale	0.485	0.085	5.717	0.000	0.319	0.652
income_cat	-0.088	0.020	-4.386	0.000	-0.127	-0.049
physhlth_days	0.055	0.004	14.483	0.000	0.048	0.063

1b. (5 pts) Report the adjusted ORs with 95% CIs in a publication-quality table using tbl_regression().

mod_lab_full |>
  tbl_regression(
    exponentiate = TRUE,
    label = list(
      sleep_hrs     ~ "Sleep hours (per 1 hr)",
      exercise      ~ "Exercise (past 30 days)",
      smoker        ~ "Smoking status",
      sex           ~ "Sex",
      income_cat    ~ "Income category (per unit)",
      physhlth_days ~ "Physically unhealthy days"
    )
  ) |>
  bold_labels() |>
  bold_p() |>
  modify_caption("**Table 1. Adjusted Odds Ratios for Frequent Mental Distress, BRFSS 2020**")

**Table 1. Adjusted Odds Ratios for Frequent Mental Distress, BRFSS 2020**
Characteristic	OR	95% CI	p-value
Sleep hours (per 1 hr)	0.82	0.78, 0.87	<0.001
Exercise (past 30 days)
No	—	—
Yes	0.91	0.76, 1.10	0.3
Smoking status
Former/Never	—	—
Current	1.66	1.40, 1.96	<0.001
Sex
Male	—	—
Female	1.62	1.38, 1.92	<0.001
Income category (per unit)	0.92	0.88, 0.95	<0.001
Physically unhealthy days	1.06	1.05, 1.07	<0.001
Abbreviations: CI = Confidence Interval, OR = Odds Ratio

1c. (5 pts) Interpret the adjusted OR for two predictors of your choice in 1-2 sentences each. Make sure to mention what the OR represents (per unit change for continuous; reference category for categorical).

Sleep hours: The adjusted OR (0.82) for sleep hours indicates that each additional hour of nightly sleep is associated with roughly 18% lower odds of FMD, after adjusting for exercise, smoking, sex, income, and physical health — confirming sleep as a strong independent protective factor.

Smoking status: The adjusted OR for smoking compares current smokers to the reference group (Former/Never smokers), holding all other predictors constant. Current smokers have substantially higher odds of FMD (aOR approximately 1.66) relative to former or never smokers, underscoring cigarette smoking as an independent risk factor for frequent mental distress even after accounting for socioeconomic and health behavioral factors.

Task 2: Wald and Likelihood Ratio Tests (15 points)

2a. (5 pts) Identify the Wald p-value for each predictor in your model from the tidy() or summary() output.

tidy(mod_lab_full, conf.int = TRUE, exponentiate = TRUE) |>
  filter(term != "(Intercept)") |>
  mutate(
    across(c(estimate, std.error, statistic, conf.low, conf.high), ~ round(.x, 3)),
    p.value = format.pval(p.value, digits = 3, eps = 0.001)
  ) |>
  kable(
    col.names = c("Term", "aOR", "SE", "z (Wald)", "95% CI Lower", "95% CI Upper", "Wald p-value"),
    caption   = "Wald Tests for Each Coefficient in the Full Lab Model"
  ) |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Wald Tests for Each Coefficient in the Full Lab Model
Term	aOR	SE	z (Wald)	95% CI Lower	95% CI Upper	Wald p-value
sleep_hrs	0.823	0.027	-7.206	<0.001	0.781	0.868
exerciseYes	0.913	0.094	-0.967	0.334	0.761	1.099
smokerCurrent	1.656	0.087	5.801	<0.001	1.396	1.964
sexFemale	1.625	0.085	5.717	<0.001	1.376	1.920
income_cat	0.916	0.020	-4.386	<0.001	0.881	0.953
physhlth_days	1.057	0.004	14.483	<0.001	1.049	1.065

Interpretation: All six predictors yield statistically significant Wald p-values (all < 0.05), indicating that each independently contributes to predicting the log-odds of FMD after adjusting for the others. Sleep hours and physically unhealthy days show the most extreme test statistics, reflecting the strongest evidence of association with FMD.

2b. (5 pts) Fit a reduced model that drops one predictor of your choice. Perform a likelihood ratio test comparing the full and reduced models using anova(reduced, full, test = "LRT").

Dropped variable income category from the full model to test whether it jointly improves model fit.

mod_lab_reduced <- glm(
  fmd ~ sleep_hrs + exercise + smoker + sex + physhlth_days,
  data   = brfss_logistic,
  family = binomial
)

anova(mod_lab_reduced, mod_lab_full, test = "LRT") |>
  kable(
    digits  = 3,
    caption = "LR Test: Does adding income_cat improve the model?"
  ) |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

LR Test: Does adding income_cat improve the model?
Resid. Df	Resid. Dev	Df	Deviance	Pr(>Chi)
4994	3780.971	NA	NA	NA
4993	3762.018	1	18.953	0

2c. (5 pts) Compare the conclusions from the Wald test (for the dropped predictor) and the LR test. Do they agree? In 2-3 sentences, explain when the two tests might disagree.

Both the Wald test (from Task 2a) and the LR test converge on the same conclusion: income category is a statistically significant predictor of FMD (both p < 0.05), and dropping it meaningfully worsens model fit. The likelihood ratio test demonstrates that adding income significantly improves model fit, confirming its importance as a socioeconomic determinant in the multivariable model.

Task 3: Test an Interaction (20 points)

3a. (5 pts) Fit a model that includes an interaction between two predictors of your choice.

We test whether the effect of smoking status on FMD differs by sex

mod_lab_interact <- glm(
  fmd ~ smoker * sex + sleep_hrs + exercise + income_cat + physhlth_days,
  data   = brfss_logistic,
  family = binomial
)

mod_lab_interact |>
  tbl_regression(exponentiate = TRUE) |>
  bold_labels() |>
  bold_p() |>
  modify_caption("**Model with Smoking × Sex Interaction**")

**Model with Smoking × Sex Interaction**
Characteristic	OR	95% CI	p-value
smoker
Former/Never	—	—
Current	1.47	1.15, 1.89	0.002
sex
Male	—	—
Female	1.48	1.18, 1.85	<0.001
sleep_hrs	0.82	0.78, 0.87	<0.001
exercise
No	—	—
Yes	0.92	0.76, 1.10	0.4
income_cat	0.92	0.88, 0.95	<0.001
physhlth_days	1.06	1.05, 1.07	<0.001
smoker * sex
Current * Female	1.24	0.89, 1.73	0.2
Abbreviations: CI = Confidence Interval, OR = Odds Ratio

3b. (5 pts) Perform a likelihood ratio test comparing the model with the interaction to the model without it.

mod_lab_no_interact <- glm(
  fmd ~ smoker + sex + sleep_hrs + exercise + income_cat + physhlth_days,
  data   = brfss_logistic,
  family = binomial
)

anova(mod_lab_no_interact, mod_lab_interact, test = "LRT") |>
  kable(
    digits  = 3,
    caption = "LR Test for Smoking × Sex Interaction"
  ) |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

LR Test for Smoking × Sex Interaction
Resid. Df	Resid. Dev	Df	Deviance	Pr(>Chi)
4993	3762.018	NA	NA	NA
4992	3760.428	1	1.59	0.207

3c. (5 pts) Create a visualization of the interaction using ggpredict() and plot().

ggpredict(mod_lab_interact, terms = c("smoker", "sex")) |>
  plot() +
  labs(
    title    = "Predicted Probability of FMD by Smoking Status and Sex",
    subtitle = "Interaction model; ribbons = 95% confidence intervals",
    x        = "Smoking Status",
    y        = "Predicted Probability of FMD",
    color    = "Sex"
  ) +
  scale_y_continuous(labels = scales::percent_format()) +
  theme_minimal()

3d. (5 pts) In 3-4 sentences, interpret the interaction. Does the effect of one predictor differ across levels of the other? If statistically significant, report the stratum-specific odds ratios.

ggpredict(mod_lab_interact, terms = c("smoker", "sex")) |>
  as_tibble() |>
  pivot_wider(id_cols = group, names_from = x, values_from = predicted) |>
  mutate(OR_current_vs_former = (`Current` / (1 - `Current`)) /
                                (`Former/Never` / (1 - `Former/Never`))) |>
  dplyr::select(Sex = group, OR_current_vs_former) |>
  kable(
    digits   = 3,
    col.names = c("Sex", "OR (Current vs. Former/Never Smoker)"),
    caption  = "Stratum-Specific Odds Ratios for Smoking by Sex"
  ) |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Stratum-Specific Odds Ratios for Smoking by Sex
Sex	OR (Current vs. Former/Never Smoker)
Male	1.473
Female	1.826

Interpretation: the LR test is not statistically significant (p ≥ 0.05), there is insufficient evidence of effect modification by sex. The relationship between smoking and FMD can then be considered similar across sexes, and a more parsimonious model without the interaction term is preferred.

Regardless of statistical significance, stratified estimates and interaction plots can be useful for visualizing and communicating potential differences in effect sizes across groups, particularly for non-technical audiences.

Task 4: Goodness-of-Fit and Discrimination (25 points)

4a. (5 pts) Compute McFadden’s pseudo-R² for your full model using performance::r2_mcfadden().

performance::r2_mcfadden(mod_lab_full)

## # R2 for Generalized Linear Regression
##        R2: 0.115
##   adj. R2: 0.115

Interpretation: our model achieves approximately 0.15, it represents model performance is stable after accounting for six predictors collectively. It captures an reasonable share of the variation in FMD probability, though substantial residual unexplained variation is expected in population-level behavioral health data.

4b. (5 pts) Perform the Hosmer-Lemeshow goodness-of-fit test using ResourceSelection::hoslem.test(). Report the test statistic and p-value. Comment on the interpretation given your sample size.

hl_lab <- hoslem.test(
  x = as.numeric(brfss_logistic$fmd) - 1,
  y = fitted(mod_lab_full),
  g = 10
)

hl_lab

## 
##  Hosmer and Lemeshow goodness of fit (GOF) test
## 
## data:  as.numeric(brfss_logistic$fmd) - 1, fitted(mod_lab_full)
## X-squared = 16.297, df = 8, p-value = 0.03832

tibble(
  Statistic = round(hl_lab$statistic, 3),
  df        = hl_lab$parameter,
  `p-value` = format.pval(hl_lab$p.value, digits = 3, eps = 0.001)
) |>
  kable(caption = "Hosmer-Lemeshow Goodness-of-Fit Test") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

Hosmer-Lemeshow Goodness-of-Fit Test
Statistic	df	p-value
16.297	8	0.0383

Interpretation: The Hosmer–Lemeshow goodness-of-fit test assesses how well the predicted probabilities from the logistic regression model agree with the observed outcomes across groups of risk.

In this model, the test yielded a chi-square statistic of 16.297 with 8 degrees of freedom (p = 0.038). Because the p-value is less than 0.05, there is evidence to reject the null hypothesis of good model fit. This indicates that the model’s predicted probabilities differ significantly from the observed outcomes in at least some subgroups, suggesting suboptimal calibration. The Hosmer–Lemeshow test indicated a statistically significant lack of fit (p = 0.038), suggesting some discrepancies between predicted and observed outcomes. However, given the large sample size, this result may reflect minor deviations rather than substantial model misspecification. Therefore, model fit should be interpreted alongside other metrics such as pseudo-R² and substantive plausibility of the predictors.

4c. (5 pts) Create a calibration plot showing observed vs. predicted probabilities by decile. Comment on whether the model appears well calibrated.

brfss_logistic |>
  mutate(
    pred_prob   = fitted(mod_lab_full),
    obs_outcome = as.numeric(fmd) - 1,
    decile      = ntile(pred_prob, 10)
  ) |>
  group_by(decile) |>
  summarise(
    mean_pred = mean(pred_prob),
    mean_obs  = mean(obs_outcome),
    n         = n(),
    .groups   = "drop"
  ) |>
  ggplot(aes(x = mean_pred, y = mean_obs)) +
  geom_abline(slope = 1, intercept = 0, color = "red", linetype = "dashed",
              linewidth = 0.8) +
  geom_point(aes(size = n), color = "steelblue", alpha = 0.85) +
  geom_line(color = "steelblue", linewidth = 0.7) +
  scale_size_continuous(name = "Decile n", range = c(3, 8)) +
  scale_x_continuous(labels = scales::percent_format()) +
  scale_y_continuous(labels = scales::percent_format()) +
  labs(
    title    = "Calibration Plot: Observed vs. Predicted Probability of FMD",
    subtitle = "Each point = one predicted probability decile; dashed line = perfect calibration",
    x        = "Mean Predicted Probability (within decile)",
    y        = "Observed Proportion with FMD (within decile)"
  ) +
  theme_minimal()

Interpretation: The calibration plot provides a visual summary of how closely the model’s predicted probabilities align with observed FMD rates across the full range of risk. Points falling near the red 45-degree reference line indicate good calibration. Systematic deviation — such as points lying above the line at high predicted probabilities — would signal that the model over-predicts risk for high-risk individuals (or vice versa). A well-calibrated model is particularly important in clinical and public health applications where predicted probabilities are used directly for risk communication or resource allocation. Even if some deciles deviate slightly from the diagonal, the overall pattern of the calibration plot is the key diagnostic for assessing whether the model produces reliable predicted probabilities.

4d. (10 pts) Compute and plot the ROC curve using pROC::roc(). Report the AUC. Based on the AUC value, how would you describe the model’s discrimination ability (poor, acceptable, excellent, outstanding)?

roc_lab <- roc(
  response  = brfss_logistic$fmd,
  predictor = fitted(mod_lab_full),
  levels    = c("No", "Yes"),
  direction = "<"
)

auc_lab <- auc(roc_lab)

# ROC curve plot
ggroc(roc_lab, color = "#2166ac", linewidth = 1.3) +
  geom_abline(slope = 1, intercept = 1, linetype = "dashed",
              color = "red", linewidth = 0.8) +
  annotate("text", x = 0.35, y = 0.15,
           label = paste0("AUC = ", round(auc_lab, 3)),
           size = 5, color = "#2166ac", fontface = "bold") +
  labs(
    title    = "ROC Curve for Frequent Mental Distress — Lab Model",
    subtitle = "Blue curve = model; red dashed = chance (AUC = 0.50)",
    x        = "Specificity (1 − False Positive Rate)",
    y        = "Sensitivity (True Positive Rate)"
  ) +
  theme_minimal()

# Print AUC with confidence interval
ci_auc <- ci.auc(roc_lab)
tibble(
  AUC        = round(as.numeric(auc_lab), 3),
  `95% CI Lower` = round(ci_auc[1], 3),
  `95% CI Upper` = round(ci_auc[3], 3)
) |>
  kable(caption = "AUC with 95% Bootstrap Confidence Interval") |>
  kable_styling(bootstrap_options = "striped", full_width = FALSE)

AUC with 95% Bootstrap Confidence Interval
AUC	95% CI Lower	95% CI Upper
0.736	0.716	0.757

Interpretation: The AUC quantifies the model’s ability to correctly rank a randomly selected case (FMD = Yes) above a randomly selected non-case (FMD = No). Based on our model’s AUC:

If AUC ≈ 0.70–0.80: Acceptable discrimination — the model performs meaningfully better than chance and is a reasonable screening tool at the population level.

Lab Summary

Task | Key Finding |

Task 1
Multiple logistic regression with six predictors (sleep, exercise, smoking, sex, income, physical health) yielded significant adjusted ORs for all predictors; sleep and physical unhealthy days had the largest effect sizes.

Task 2 Wald and LR tests agreed in concluding that income category significantly improves model fit; both tests converge in large samples but LR is preferred when sample sizes are small or coefficients are extreme |

Task 3 The smoking × sex interaction was examined; stratum-specific ORs reveal whether the smoking-FMD association differs by sex, with visualization confirming or ruling out effect modification |

Task 4 McFadden’s R², Hosmer-Lemeshow test, calibration plot, and ROC/AUC together assess both calibration and discrimination; the model shows acceptable to excellent discrimination based on AUC, with caveats about HL test over-power at n = 5,000 |

Overall interpretation:

Frequent mental distress among U.S. adults is associated with a variety of modifiable behavioral and socioeconomic factors. After multivariable adjustment, shorter sleep duration, current smoking, lower income, and a greater number of physically unhealthy days were independently associated with higher odds of FMD, while physical activity was not statistically significant in the adjusted model. The model demonstrated acceptable discrimination (AUC > 0.70), although the Hosmer–Lemeshow test indicated some evidence of imperfect calibration, which may partly reflect the large sample size.

Interaction analysis assessed whether the association between smoking and FMD differed by sex; however, no statistically significant interaction was observed, suggesting that the effect of smoking on mental distress is similar across males and females. Collectively, these findings highlight sleep and smoking cessation, along with broader socioeconomic conditions, as key targets for population-level mental health promotion.

End of Lab Activity

Logistic Regression — Part 2

EPI 553 — Principles of Statistical Inference II (Spring 2026)

Samriddhi Ranjan

April 15, 2026