#Installing & Applying Packages
packages <-c("tidyverse", "fst", "modelsummary", "viridis")
new_packages <-packages[!(packages %in% installed.packages()[,"Package"])]
if(length(new_packages)) install.packages(new_packages)
lapply(packages, library, character.only = TRUE)
## ── Attaching core tidyverse packages ──────────────────────── tidyverse 2.0.0 ──
## ✔ dplyr 1.1.4 ✔ readr 2.1.5
## ✔ forcats 1.0.0 ✔ stringr 1.5.1
## ✔ ggplot2 3.4.4 ✔ tibble 3.2.1
## ✔ lubridate 1.9.3 ✔ tidyr 1.3.0
## ✔ purrr 1.0.2
## ── Conflicts ────────────────────────────────────────── tidyverse_conflicts() ──
## ✖ dplyr::filter() masks stats::filter()
## ✖ dplyr::lag() masks stats::lag()
## ℹ Use the conflicted package (<http://conflicted.r-lib.org/>) to force all conflicts to become errors
## `modelsummary` has built-in support to draw text-only (markdown) tables.
## To generate tables in other formats, you must install one or more of
## these libraries:
##
## install.packages(c(
## "kableExtra",
## "gt",
## "flextable",
##
## "huxtable",
## "DT"
## ))
##
## Alternatively, you can set markdown as the default table format to
## silence this alert:
##
## config_modelsummary(factory_default = "markdown")
##
##
## Loading required package: viridisLite
## [[1]]
## [1] "lubridate" "forcats" "stringr" "dplyr" "purrr" "readr"
## [7] "tidyr" "tibble" "ggplot2" "tidyverse" "stats" "graphics"
## [13] "grDevices" "utils" "datasets" "methods" "base"
##
## [[2]]
## [1] "fst" "lubridate" "forcats" "stringr" "dplyr" "purrr"
## [7] "readr" "tidyr" "tibble" "ggplot2" "tidyverse" "stats"
## [13] "graphics" "grDevices" "utils" "datasets" "methods" "base"
##
## [[3]]
## [1] "modelsummary" "fst" "lubridate" "forcats" "stringr"
## [6] "dplyr" "purrr" "readr" "tidyr" "tibble"
## [11] "ggplot2" "tidyverse" "stats" "graphics" "grDevices"
## [16] "utils" "datasets" "methods" "base"
##
## [[4]]
## [1] "viridis" "viridisLite" "modelsummary" "fst" "lubridate"
## [6] "forcats" "stringr" "dplyr" "purrr" "readr"
## [11] "tidyr" "tibble" "ggplot2" "tidyverse" "stats"
## [16] "graphics" "grDevices" "utils" "datasets" "methods"
## [21] "base"
This is an R Markdown document. Markdown is a simple formatting syntax for authoring HTML, PDF, and MS Word documents. For more details on using R Markdown see http://rmarkdown.rstudio.com.
When you click the Knit button a document will be generated that includes both content as well as the output of any embedded R code chunks within the document. You can embed an R code chunk like this:
summary(cars)
## speed dist
## Min. : 4.0 Min. : 2.00
## 1st Qu.:12.0 1st Qu.: 26.00
## Median :15.0 Median : 36.00
## Mean :15.4 Mean : 42.98
## 3rd Qu.:19.0 3rd Qu.: 56.00
## Max. :25.0 Max. :120.00
You can also embed plots, for example:
Note that the echo = FALSE parameter was added to the
code chunk to prevent printing of the R code that generated the plot. ##
Task 1
Provide code and answer.
Prompt: in the tutorial, we calculated the average trust in others for France and visualized it. Using instead the variable ‘Trust in Parliament’ (trstplt) and the country of Spain (country file provided on course website), visualize the average trust by survey year. You can truncate the y-axis if you wish. Provide appropriate titles and labels given the changes. What are your main takeaways based on the visual (e.g., signs of increase, decrease, or stall)?
spain_data <- read.fst("spain_data.fst")
spain_data <- spain_data %>%
mutate(
trstplt = ifelse(trstplt %in% c(77, 88, 99), NA, trstplt), # set values 77, 88, and 99 to NA.
)
table(spain_data$trstplt)
##
## 0 1 2 3 4 5 6 7 8 9 10
## 5165 1830 2329 2441 2085 2890 1154 639 355 80 71
spain_data$year <- NA
replacements <- c(2002, 2004, 2006, 2008, 2010, 2012, 2014, 2016, 2018, 2020)
for(i in 1:10){
spain_data$year[spain_data$essround == i] <- replacements[i]
}
table(spain_data$year)
##
## 2002 2004 2006 2008 2010 2012 2014 2016 2018 2020
## 1729 1663 1876 2576 1885 1889 1925 1958 1668 2283
trust_by_year <- spain_data %>%
group_by(year) %>%
summarize(mean_trust = mean(trstplt, na.rm = TRUE))
trust_by_year
## # A tibble: 10 × 2
## year mean_trust
## <dbl> <dbl>
## 1 2002 3.41
## 2 2004 3.66
## 3 2006 3.49
## 4 2008 3.32
## 5 2010 2.72
## 6 2012 1.91
## 7 2014 2.23
## 8 2016 2.40
## 9 2018 2.55
## 10 2020 1.94
ggplot(trust_by_year, aes(x = year, y = mean_trust)) +
geom_line(color = "blue", size = 1) + # Line to show the trend
geom_point(color = "red", size = 3) + # Points to highlight each year's value
labs(title = "Trust Parliament Spain (2002-2020)",
x = "Survey Year",
y = "Average Trust in Parliament (0-10 scale)") +
ylim(0, 10) + # Setting the y-axis limits from 0 to 10
theme_minimal()
## Warning: Using `size` aesthetic for lines was deprecated in ggplot2 3.4.0.
## ℹ Please use `linewidth` instead.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.
The main takeways based on the graph is that there is a steady decrease
from around 2003 to 2010 for the avergae trust in parliament in Spain.
The trust in parliament is lowest during the year around 2011. After
2011 the trust in Parliament begins to steadily increase.
Provide answer only.
Prompt and question: Based on the figure we produced above called task2_plot, tell us: what are your main takeaways regarding France relative to Italy and Norway? Make sure to be concrete and highlight at least two important comparative trends visualized in the graph.
2 Important comparative trends that can be visualzied in the graph can be between the years 1980 to 2000, both France and Italy seem to be trending in a similairly downward direction as less proportion feel close to their poltical party. Another key takeway could be Norway’s steady decline in proportions feeling close to their poltical party from the years 1960 to 1980.
Provide code and answer.
Question: What is the marginal percentage of Italian men who feel close to a particular political party?
italy_data <- read.fst("italy_data.fst")
italy_data <- italy_data %>%
mutate(
gndr = case_when(
gndr == 1 ~ "Male",
gndr == 2 ~ "Female",
TRUE ~ NA_character_ # Set anything that is not 1 or 2 to NA
),
lrscale = case_when(
lrscale %in% 0:3 ~ "Left", # Left-wing (0 to 3)
lrscale %in% 7:10 ~ "Right", # Right-wing (7 to 10)
TRUE ~ NA_character_ # Moderate (4, 5, 6) and special codes (77, 88, 99) set to NA
)
)
lrscale_percentages <- italy_data %>% # Begin with the dataset 'italy_data'
filter(!is.na(lrscale), !is.na(gndr)) %>% # Filter out rows where 'lrscale' or 'gender' is NA (missing data)
group_by(gndr, lrscale) %>% # Group the data by 'gender' and 'lrscale' categories
summarise(count = n(), .groups = 'drop') %>% # Summarise each group to get counts, and then drop groupings
mutate(percentage = count / sum(count) * 100) # Calculate percentage for each group by dividing count by total count and multiplying by 100
lrscale_percentages # The resulting dataframe
## # A tibble: 4 × 4
## gndr lrscale count percentage
## <chr> <chr> <int> <dbl>
## 1 Female Left 930 23.9
## 2 Female Right 955 24.5
## 3 Male Left 924 23.7
## 4 Male Right 1084 27.8
Interpreting Marginal Percentages in Survey Data:
Male and Left: Of all Italy respondents, 23.7% are males who lean politically left.
Male and Right: 27.8% of all Italy respondents are males who lean politically right.
Provide code and output only.
Prompt: In the tutorial, we calculated then visualized the percentage distribution for left vs. right by gender for France. Your task is to replicate the second version of the visualization but for the country of Sweden instead.
sweden_data <- read.fst("sweden_data.fst")
sweden_data <- sweden_data %>%
mutate(
gndr = case_when(
gndr == 1 ~ "Male",
gndr == 2 ~ "Female",
TRUE ~ NA_character_ # Set anything that is not 1 or 2 to NA
),
lrscale = case_when(
lrscale %in% 0:3 ~ "Left", # Left-wing (0 to 3)
lrscale %in% 7:10 ~ "Right", # Right-wing (7 to 10)
TRUE ~ NA_character_ # Moderate (4, 5, 6) and special codes (77, 88, 99) set to NA
)
)
lrscale_percentages <- sweden_data %>% # Begin with the dataset 'sweden_data'
filter(!is.na(lrscale), !is.na(gndr)) %>% # Filter out rows where 'lrscale' or 'gender' is NA (missing data)
group_by(gndr, lrscale) %>% # Group the data by 'gender' and 'lrscale' categories
summarise(count = n(), .groups = 'drop') %>% # Summarise each group to get counts, and then drop groupings
mutate(percentage = count / sum(count) * 100) # Calculate percentage for each group by dividing count by total count and multiplying by 100
lrscale_percentages # The resulting dataframe
## # A tibble: 4 × 4
## gndr lrscale count percentage
## <chr> <chr> <int> <dbl>
## 1 Female Left 2296 23.0
## 2 Female Right 2530 25.3
## 3 Male Left 2062 20.6
## 4 Male Right 3107 31.1
lrscale_plot <- ggplot(lrscale_percentages, aes(x = lrscale, y = percentage, fill = lrscale)) +
geom_bar(stat = "identity", position = position_dodge()) + # Dodged bar chart
facet_wrap(~ gndr, scales = "fixed") + # Fixed scales for y-axis across facets
scale_fill_brewer(palette = "Set1") + # Distinct colors for Left and Right
labs(
title = "Political Orientation (Left vs. Right) by Gender in Sweden",
x = "Political Orientation",
y = "Percentage of Respondents",
fill = "Orientation"
) +
theme_minimal() + # Minimal theme for clarity
theme(legend.position = "bottom") # Legend at the bottom
# Display the ggplot object
lrscale_plot
Provide code and answer: In Hungary, what is the conditional probability of NOT feeling close to any particular party given that the person lives in a rural area?
Answer: The conditional probibility of NOT feeling close to any particular party given that the person lives in a rural area is 55%
hungary_data <- read.fst("hungary_data.fst")
#Cleaning up data
hungary_data <-hungary_data %>%
mutate(clsprty=ifelse(clsprty %in% c(7,8,9), NA, clsprty),
clsprty = case_when(
clsprty == 2 ~ "No",
clsprty == 1 ~ "Yes",
TRUE ~ NA_character_))
table(hungary_data$clsprty)
##
## No Yes
## 8679 7342
# Cleaning and recoding domicil as a new variable "geo" with named responses
hungary_data <- hungary_data %>%
mutate(
geo = recode(as.character(domicil),
'1' = "Urban",
'2' = "Urban",
'3' = "Rural",
'4' = "Rural",
'5' = "Rural",
'7' = NA_character_,
'8' = NA_character_,
'9' = NA_character_)
) %>%
filter(!is.na(clsprty), !is.na(geo))
#Calculate conditional probability
cond <- hungary_data %>%
count(clsprty, geo) %>%
group_by(geo) %>%
mutate(prob = n / sum(n))
cond
## # A tibble: 4 × 4
## # Groups: geo [2]
## clsprty geo n prob
## <chr> <chr> <int> <dbl>
## 1 No Rural 6275 0.554
## 2 No Urban 2395 0.512
## 3 Yes Rural 5055 0.446
## 4 Yes Urban 2283 0.488