This is an R Markdown document. Markdown is a simple formatting syntax for authoring HTML, PDF, and MS Word documents. For more details on using R Markdown see http://rmarkdown.rstudio.com.
When you click the Knit button a document will be generated that includes both content as well as the output of any embedded R code chunks within the document. You can embed an R code chunk like this:
summary(cars)
## speed dist
## Min. : 4.0 Min. : 2.00
## 1st Qu.:12.0 1st Qu.: 26.00
## Median :15.0 Median : 36.00
## Mean :15.4 Mean : 42.98
## 3rd Qu.:19.0 3rd Qu.: 56.00
## Max. :25.0 Max. :120.00
You can also embed plots, for example:
Note that the echo = FALSE parameter was added to the
code chunk to prevent printing of the R code that generated the
plot.
Instructions: Start a new R markdown for the homework and call it “Yourlastname_Firstname_Homework_2”.
Copy everything below from Task 1 to Task 5. Keep the task prompt and questions, and provide your code and answer underneath.
Remember: you need all the steps for your code to work, including loading your data – otherwise it will not knit.
To generate a new code box, click on the +C sign above. Underneath your code, provide your answer to the task question.
When you are done, click on “Knit” above, then “Knit to Html”. Wait for everything to compile. If you get an error like “Execution halted”, it means there are issues with your code you must fix. When all issues are fixed, it will prompt a new window. Then click on “Publish” in the top right, and then Rpubs (the first option) and follow the instructions to create your Rpubs account and get your Rpubs link for your document (i.e., html link as I provide for the tutorial).
Note: Make sure to provide both your markdown file and R pubs link. If you do not submit both, you will be penalized 2 pts. out of the 5 pts. total.
Provide code and answer.
Prompt: in the tutorial, we calculated the average trust in others for France and visualized it. Using instead the variable ‘Trust in Parliament’ (trstplt) and the country of Spain (country file provided on course website), visualize the average trust by survey year. You can truncate the y-axis if you wish. Provide appropriate titles and labels given the changes. What are your main takeaways based on the visual (e.g., signs of increase, decrease, or stall)?
rm(list=ls());gc()
## used (Mb) gc trigger (Mb) limit (Mb) max used (Mb)
## Ncells 545650 29.2 1224277 65.4 NA 669445 35.8
## Vcells 1013514 7.8 8388608 64.0 16384 1851679 14.2
# List of packages
packages <- c("tidyverse", "fst", "modelsummary", "viridis") # add any you need here
# Install packages if they aren't installed already
new_packages <- packages[!(packages %in% installed.packages()[,"Package"])]
if(length(new_packages)) install.packages(new_packages)
# Load the packages
lapply(packages, library, character.only = TRUE)
## ── Attaching core tidyverse packages ──────────────────────── tidyverse 2.0.0 ──
## ✔ dplyr 1.1.4 ✔ readr 2.1.4
## ✔ forcats 1.0.0 ✔ stringr 1.5.1
## ✔ ggplot2 3.4.4 ✔ tibble 3.2.1
## ✔ lubridate 1.9.3 ✔ tidyr 1.3.0
## ✔ purrr 1.0.2
## ── Conflicts ────────────────────────────────────────── tidyverse_conflicts() ──
## ✖ dplyr::filter() masks stats::filter()
## ✖ dplyr::lag() masks stats::lag()
## ℹ Use the conflicted package (<http://conflicted.r-lib.org/>) to force all conflicts to become errors
## Loading required package: viridisLite
## [[1]]
## [1] "lubridate" "forcats" "stringr" "dplyr" "purrr" "readr"
## [7] "tidyr" "tibble" "ggplot2" "tidyverse" "stats" "graphics"
## [13] "grDevices" "utils" "datasets" "methods" "base"
##
## [[2]]
## [1] "fst" "lubridate" "forcats" "stringr" "dplyr" "purrr"
## [7] "readr" "tidyr" "tibble" "ggplot2" "tidyverse" "stats"
## [13] "graphics" "grDevices" "utils" "datasets" "methods" "base"
##
## [[3]]
## [1] "modelsummary" "fst" "lubridate" "forcats" "stringr"
## [6] "dplyr" "purrr" "readr" "tidyr" "tibble"
## [11] "ggplot2" "tidyverse" "stats" "graphics" "grDevices"
## [16] "utils" "datasets" "methods" "base"
##
## [[4]]
## [1] "viridis" "viridisLite" "modelsummary" "fst" "lubridate"
## [6] "forcats" "stringr" "dplyr" "purrr" "readr"
## [11] "tidyr" "tibble" "ggplot2" "tidyverse" "stats"
## [16] "graphics" "grDevices" "utils" "datasets" "methods"
## [21] "base"
getwd()
## [1] "/Users/vanessa/Desktop/Tutorials "
spain_data <- read.fst("spain_data.fst")
spain_data <- spain_data %>%
mutate(
trstplt = ifelse(trstplt %in% c(77, 88, 99), NA, trstplt), # set values 77, 88, and 99 to NA.
)
table(spain_data$trstplt) # if there are values that are not supposed to be there (e.g., 77, 88, 99 in this case), then we need to deal with it
##
## 0 1 2 3 4 5 6 7 8 9 10
## 5165 1830 2329 2441 2085 2890 1154 639 355 80 71
spain_data$year <- NA
replacements <- c(2002, 2004, 2006, 2008, 2010, 2012, 2014, 2016, 2018, 2020)
for(i in 1:10){
spain_data$year[spain_data$essround == i] <- replacements[i]
}
table(spain_data$year)
##
## 2002 2004 2006 2008 2010 2012 2014 2016 2018 2020
## 1729 1663 1876 2576 1885 1889 1925 1958 1668 2283
trust_in_parliament <- spain_data %>%
group_by(year) %>%
summarize(mean_trust = mean(trstplt, na.rm = TRUE))
trust_in_parliament
## # A tibble: 10 × 2
## year mean_trust
## <dbl> <dbl>
## 1 2002 3.41
## 2 2004 3.66
## 3 2006 3.49
## 4 2008 3.32
## 5 2010 2.72
## 6 2012 1.91
## 7 2014 2.23
## 8 2016 2.40
## 9 2018 2.55
## 10 2020 1.94
ggplot(trust_in_parliament, aes(x = year, y = mean_trust)) +
geom_line(color = "blue", size = 1) + # Line to show the trend
geom_point(color = "red", size = 3) + # Points to highlight each year's value
labs(title = "Trust in Parliament in Spain (2002-2020)",
x = "Survey Year",
y = "Average Trust (0-10 scale)") +
ylim(0, 5) + # Setting the y-axis limits from 0 to 10
theme_minimal()
## Warning: Using `size` aesthetic for lines was deprecated in ggplot2 3.4.0.
## ℹ Please use `linewidth` instead.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.
Based on the graph, trust in parliament had a decreasing trend from 2002
until 2010. After 2010 the trust of people in parliament in Spain begins
to increase slightly until around 2017. From 2017 until 2020, it is
clear that trust in parliament begins to once again decrease in to its
second lowest average in all of the data presented, with the average in
2012 being slightly lower.
## Task 2
Provide answer only.
Prompt and question: Based on the figure we produced above called task2_plot, tell us: what are your main takeaways regarding France relative to Italy and Norway? Make sure to be concrete and highlight at least two important comparative trends visualized in the graph.
The data trend for France between the categories of 1920 to 1950 are close to the trend for Norway, however after the 1950 category to the 2000 category, the trend and data results follow very closely toward Italy’s data points. Another comparative trend can be seen between Norway and France follow what appears to be mirroring trends. Between the category of 1920 to 1940, Norway slightly decreases whereas France slightly increases. Between the categories of 1950 to 2000, the two countries follow relatively the same trend of drastically decreasing.
Provide code and answer.
Question: What is the marginal percentage of Italian men who feel close to a particular political party?
italy_data <- read.fst("italy_data.fst")
italy_data <- italy_data %>%
# Modify 'clsprty' column: set values of 2 to 0, and values in 7, 8, 9 to NA. Retain other values as is.
mutate(
clsprty = ifelse(clsprty == 2, 0, ifelse(clsprty %in% c(7, 8, 9), NA, clsprty))
) %>%
# Modify 'yrbrn' column: set specific values (7777, 8888, 9999) to NA.
mutate(
yrbrn = ifelse(yrbrn %in% c(7777, 8888, 9999), NA, yrbrn))
italy_data <- italy_data %>%
mutate(
gndr = case_when(
gndr == 1 ~ "Male",
gndr == 2 ~ "Female",
TRUE ~ NA_character_ # Set anything that is not 1 or 2 to NA
),
lrscale = case_when(
lrscale %in% 0:3 ~ "Left", # Left-wing (0 to 3)
lrscale %in% 7:10 ~ "Right", # Right-wing (7 to 10)
TRUE ~ NA_character_ # Moderate (4, 5, 6) and special codes (77, 88, 99) set to NA
)
)
lrscale_percentages <- italy_data %>% # Begin with the dataset 'france_data'
filter(!is.na(lrscale), !is.na(gndr)) %>% # Filter out rows where 'lrscale' or 'gender' is NA (missing data)
group_by(gndr, lrscale) %>% # Group the data by 'gender' and 'lrscale' categories
summarise(count = n(), .groups = 'drop') %>% # Summarise each group to get counts, and then drop groupings
mutate(percentage = count / sum(count) * 100) # Calculate percentage for each group by dividing count by total count and multiplying by 100
lrscale_percentages # The resulting dataframe
## # A tibble: 4 × 4
## gndr lrscale count percentage
## <chr> <chr> <int> <dbl>
## 1 Female Left 930 23.9
## 2 Female Right 955 24.5
## 3 Male Left 924 23.7
## 4 Male Right 1084 27.8
The marginal percentage of Italian men who feel close to a particular party is approximately 23.73% who lean to the left politically and approximately 27.84% who lean to the right politically. This brings the total percent of men who feel close to a particular political party to approximately 51.57%.
Provide code and output only.
Prompt: In the tutorial, we calculated then visualized the percentage distribution for left vs. right by gender for France. Your task is to replicate the second version of the visualization but for the country of Sweden instead.
sweden_data <- read.fst("sweden_data.fst")
sweden_data <- sweden_data %>%
mutate(
gndr = case_when(
gndr == 1 ~ "Male",
gndr == 2 ~ "Female",
TRUE ~ NA_character_ # Set anything that is not 1 or 2 to NA
),
lrscale = case_when(
lrscale %in% 0:3 ~ "Left", # Left-wing (0 to 3)
lrscale %in% 7:10 ~ "Right", # Right-wing (7 to 10)
TRUE ~ NA_character_ # Moderate (4, 5, 6) and special codes (77, 88, 99) set to NA
)
)
# Create a ggplot object for horizontal bar chart with the specified style
lrscale_plot_v2 <- ggplot(lrscale_percentages,
aes(x = percentage, # Use percentage directly
y = reorder(gndr, -percentage), # Order bars within each gender
fill = gndr)) + # Fill color based on Gender
# Create horizontal bar chart
geom_col() + # Draws the bars using the provided data
coord_flip() + # Flip coordinates to make bars horizontal
# Remove fill color legend
guides(fill = "none") + # Removes legend for the fill aesthetic
# Split the plot based on Political Orientation
facet_wrap(~ lrscale, nrow = 1) + # Separate plots for Left/Right
# Labels and titles for the plot
labs(x = "Percentage of Respondents", # X-axis label
y = NULL, # Remove Y-axis label
title = "Political Orientation by Gender", # Main title
subtitle = "Comparing the percentage distribution of left vs. right for Sweden (2002-2020)") + # Subtitle
# Adjust visual properties of the plot
theme(plot.title = element_text(size = 16, face = "bold"), # Format title
plot.subtitle = element_text(size = 12), # Format subtitle
axis.title.y = element_blank(), # Remove Y-axis title
legend.position = "bottom") # Position the legend at the bottom
# Display the ggplot object
lrscale_plot_v2
Provide code and answer: In Hungary, what is the conditional probability of NOT feeling close to any particular party given that the person lives in a rural area?
hungary_data <- read.fst("hungary_data.fst")
# Recode clsprty and geo variables, removing NAs
hungary_data <- hungary_data %>%
mutate(
geo = recode(as.character(domicil),
'1' = "Urban",
'2' = "Urban",
'3' = "Rural",
'4' = "Rural",
'5' = "Rural",
'7' = NA_character_,
'8' = NA_character_,
'9' = NA_character_)
) %>%
filter(!is.na(lrscale), !is.na(geo)) # Removing rows with NA in clsprty or geo
# Calculate conditional probabilities, excluding NAs
cond <- hungary_data %>%
count(lrscale, geo) %>%
group_by(geo) %>%
mutate(prob = n / sum(n))
cond
## # A tibble: 28 × 4
## # Groups: geo [2]
## lrscale geo n prob
## <dbl> <chr> <int> <dbl>
## 1 0 Rural 314 0.0266
## 2 0 Urban 234 0.0483
## 3 1 Rural 233 0.0198
## 4 1 Urban 107 0.0221
## 5 2 Rural 469 0.0398
## 6 2 Urban 215 0.0444
## 7 3 Rural 637 0.0540
## 8 3 Urban 337 0.0696
## 9 4 Rural 632 0.0536
## 10 4 Urban 332 0.0686
## # ℹ 18 more rows
The conditional probability of not feeling close to any particular party given that a person lives in a rural area is approximately 48.2%.