BushnellSOP

Camera Overview

1. Undo Latch on camera to open it like a book.

2. Overall Camera Layout

   1. LCD Screen
      1. Display Camera Settings
   2. POWER/ MODE SWITCH
      1. Turn Camera ON/OFF and into SETUP MODES
   3. SWITCHES
      1. Navigate and program camera settings
   4. SD Card Slot
      • Insert SD card with label facing upwards
      • A click sound indicates SD card is inserted correctly
      • To remove
        • gently push and the card should spring back
        • then it can be removed
   5. Battery Compartment
      • Put 8 AA batteries in exactly in image below
      • Line Up Negative/Positive symbols on camera to Negative/Positive on batteries

   

3. Buttons

   1. POWER/ MODE SWITCH

      1. ON = Power switch in the ON position (LCD screen is off.)
      2. SETUP = SETUP mode: Power switch at SETUP position (LCD screen is on).
         • Check and Change the settings of the camera
      3. OFF = OFF mode: Power switch in the OFF position

   2. MENU

      • Pressing MENU allows you to select any parameter and change its settings.

   3. OK

      • save the new setting (actually change it)

   4. Arrow Keys

      1. RIGHT/LEFT

         • Scrolls to the next or previous parameters

      2. UP/DOWN

         • Select a different setting for the currently displayed parameter

Bushnell Model A Keys

Bushnell Model B Keys

4. Screen
   1. Mode Camera
      • Camera symbol means camera in camera mode
   2. Image Resolution
      • Resolution setting of camera
      • Should be HD
   3. SD Card
      • Clear if SD card is not locked
      • If SD card is locked a lock symbol will appear in center
   4. Battery Level
   5. Date/Time
   6. Remaining Photo Capacity
      • Total number of photos SD card can hold
   7. # of Photos Taken
      • Number of photos on SD card
   8. Field Scan ON
      • Will appear if Field Scan is ON.
      • Blank if Field Scan is OFF
   9. Time Stamp ON
      1. Will appear if Time Stamp is ON
      2. Blank of Time Stamp is OFF

Power Camera On

1. Put 8 AA Batteries into the Battery Compartment
   1. Refer to Camera Overview section , subsection 2 , subsection 5 ( Battery Compartment )
2. Install SD CARD
   1. Refer to Camera Overview section , subsection 2 , subsection 4 ( SD Card Slot )
3. Move POWER/MODE SWITCH switch to SETUP postion
4. LCD Screen should turn on

Menu/Settings

• Press MENU Button
• Use LEFT/RIGHT Keys to scroll to the next or previous parameters
• For this guide use the RIGHT key to proceed

1. Set Mode - Clock

   1. Hit OK to enter the Settings

      

   2. Set Date/ Time

      • Move Cursor using ( LEFT/RIGHT Keys )
      • Change Selected ( UP/DOWN Keys )
      • Set All Values ( OK Button )

      

2. Set Mode - PreSets

   1. Using the UP/DOWN keys select Advanced
   2. Press OK to set
   3. Press RIGHT key to proceed

   

3. Set Mode - Mode

   1. Using the UP/DOWN keys select Camera
   2. Press OK to set
   3. Press RIGHT key to proceed

   

4. Set Mode - Image Size

   1. Using UP/DOWN keys select HD
   2. Press OK Button to set
   3. Press RIGHT key to proceed

   

5. Set Mode - Image Format

   1. Using UP/DOWN keys select Full Screen
   2. Press OK Button to set
   3. Press RIGHT key to proceed

   

6. Set Mode - Capture Number

   1. Using UP/DOWN keys select 1 Photo
   2. Press OK Button to set
   3. Press RIGHT key to proceed

   

7. Set Mode - LED Control

   1. Using UP/DOWN keys select High
   2. Press OK Button to set
   3. Press RIGHT key to proceed

   

8. Set Mode - Camera Name

   1. Skip
   2. Press RIGHT key to proceed

   

9. Set Mode - Video Size

   1. Skip
   2. Press RIGHT key to proceed

   

10. Set Mode - Video Length

    1. Skip
    2. Press RIGHT key to proceed

    

11. Set Mode - Interval

    1. Skip
    2. Press RIGHT key to proceed

    

12. Set Mode - Sensor Level

    1. Using UP/DOWN keys select Low
    2. Press OK to set
    3. Press RIGHT key to proceed

    

13. Set Mode - NV Shutter

    1. Using UP/DOWN keys select Auto
    2. Press OK to set
    3. Press RIGHT key to proceed

    

14. Set Mode - Camera Mode

    1. Using the UP/DOWN key set to 24hrs
    2. Press OK to set
    3. Press RIGHT key to proceed

    

15. Set Mode - Format

    1. Skip
    2. Press RIGHT key to proceed

    

16. Set Mode - Time Stamp

    1. Skip
    2. Press RIGHT button to proceed

    

17. Set Mode Field Scan

    1. Using the UP/DOWN key set to On
    2. Press OK to set/enter settings

    

    2. Interval

       1. Using the UP/DOWN key to find Interval

       2. Press OK Button

          

       3. Set Interval - 15 Mins

          1. Use UP/DOWN Keys to Change.
          2. Press OK Button to set.

          

    3. Field Scan A

       1. Use DOWN key to find Set Mode - Field Scan A

       2. Press OK to enter settings

          

       3. Field Scan A - Settings

          1. Use LEFT/RIGHT Keys to Navigate and UP/DOWN keys to select your preference.

          2. Set START to 00:00 and END to 12:00

          3. Press OK to Set

             

    4. Field Scan B

       1. Use DOWN key to find Set Mode - Field Scan B

       2. Press OK to enter settings

          

       3. Field Scan B - Settings

          1. Use LEFT/RIGHT Keys to Navigate and UP/DOWN keys to select your preference.

          2. Set START to 12:15 and END to 23:45

          3. Press OK to Set

             

    5. Press OK Button to Set / Exit

    6. Press RIGHT key to proceed

       

18. Set Mode - Coordinate Input

    1. Skip
    2. Press RIGHT key to proceed

    

19. Set Mode-Video Sound

    1. Skip
    2. Press RIGHT key to proceed

    

20. Set Mode - Default Set

    1. Skip
    2. Press RIGHT key to proceed

    

21. Set Mode - Version

    1. Skip
    2. Press RIGHT key to proceed

    

22. END of MENU Settings

    1. Pressing of RIGHT key should return you to Time Set.

    2. You Now can either

       • Press RIGHT or LEFT keys to return to any of the setting options.

       • Press MENU to exit and return to Standby Page

    

Downloading a Camera

1. Arrive at Camera

2. Unlock Pad Lock and remove camera from housing ( remove if you can )

3. Open Camera

   • Power Switch Should be ON
   • Take Photo of it (Like the one pictured below), even if it is OFF
     • The photo will allow user to both confirm it was on and that if camera malfunctioned it was a camera no a user error.

   

4. Move Power switch to OFF

   

5. Remove SD Card

   1. Refer to Camera Overview section , subsection 2 , subsection 4 ( SD Card Slot )

6. Insert Blank SD Card

   

7. Move Power Switch to SETUP

   • LCD Screen Will Turn ON.
   • IF LCD Screen does not turn ON.
     • Move Power Switch to OFF
     • Replace Batteries

8. Check Time

   1. Take photo exactly like one below.
   2. If time differs change it.
   3. Follow from MENU sections use sub section 1. to Set Clock to adjust time
   4. This camera was 2 min ahead so had to subtract 2 min

9. Check other Settings

   1. Camera Mode
   2. Field Scan On
   3. Battery Level
      • If 1/3 change batteries
   4. SD Card Unlocked
   5. If settings are good take a photo exactly like the one below.

10. Deploy Camera

    1. Move Power Switch to ON

    2. Take Photo exactly like on below.

       • The photo will allow the user to confirm that the camera iso

11. Put Camera Back in Housing and have a nice day