load libraries.
library(psych)
library(lavaan)
## This is lavaan 0.6-14
## lavaan is FREE software! Please report any bugs.
##
## Attaching package: 'lavaan'
## The following object is masked from 'package:psych':
##
## cor2cov
library(semTools)
##
## ###############################################################################
## This is semTools 0.5-6
## All users of R (or SEM) are invited to submit functions or ideas for functions.
## ###############################################################################
##
## Attaching package: 'semTools'
## The following objects are masked from 'package:psych':
##
## reliability, skew
library(semPlot)
library(dplyr)
##
## Attaching package: 'dplyr'
## The following objects are masked from 'package:stats':
##
## filter, lag
## The following objects are masked from 'package:base':
##
## intersect, setdiff, setequal, union
library(tidyverse)
## ── Attaching packages
## ───────────────────────────────────────
## tidyverse 1.3.2 ──
## ✔ ggplot2 3.4.0 ✔ purrr 0.3.4
## ✔ tibble 3.1.8 ✔ stringr 1.4.1
## ✔ tidyr 1.2.1 ✔ forcats 0.5.2
## ✔ readr 2.1.2
## ── Conflicts ────────────────────────────────────────── tidyverse_conflicts() ──
## ✖ ggplot2::%+%() masks psych::%+%()
## ✖ ggplot2::alpha() masks psych::alpha()
## ✖ readr::clipboard() masks semTools::clipboard()
## ✖ dplyr::filter() masks stats::filter()
## ✖ dplyr::lag() masks stats::lag()
load data.
data <- read.csv("~/okara004@ucr.edu - Google Drive/My Drive/classes/3 -- spring '23/PSYC 214 -- stats/homework/HW #1/HW1_Data/WLS_HW1_CFA_rev23.csv")
get descriptives.
# gender
gender <- factor(data$sexrsp, levels = 1:2, labels = c("Male", "Female"))
summary(gender)
## Male Female
## 4637 5051
4637 + 5051 ### = 9688
## [1] 9688
5051/9688 ### = 0.5213666, 52.14% female
## [1] 0.5213666
# age
data <- mutate(data, Age = 103-(data$byear))
psych::describe(data$Age) ### mean age: 64.16yrs; SD: 0.51yrs
## vars n mean sd median trimmed mad min max range skew kurtosis se
## X1 1 9688 64.16 0.51 64 64.1 0 63 66 3 1.1 2.71 0.01
# education
data$educ92 <- as.numeric(data$educ92)
psych::describe(data$educ92) ### mean: 13.61 (about 1yr of college); SD: 2.26yrs
## vars n mean sd median trimmed mad min max range skew kurtosis se
## X1 1 8452 13.61 2.26 12 13.21 0 12 21 9 1.14 0.04 0.02
# nationality on father's side
glimpse(data$ge096fa)
## int [1:9688] NA 14 4 NA 2 14 14 NA 14 14 ...
data$ge096fa <- as.factor(data$ge096fa)
summary(data$ge096fa) ### primarily european
## 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
## 633 108 52 463 549 166 128 182 6 82 81 231 4 3417 474 202
## 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33
## 43 21 47 4 20 10 91 3 8 21 55 2 1 1 1 1
## 34 35 36 37 38 39 40 41 42 NA's
## 1 5 16 11 20 9 16 11 4 2488
# nationality on mother's side
glimpse(data$ge095ma)
## int [1:9688] NA 4 1 NA 41 14 4 NA 14 14 ...
data$ge095ma <- as.factor(data$ge095ma)
summary(data$ge095ma) ### also primarily european
## 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
## 622 91 38 495 554 151 104 168 28 75 81 218 14 3106 527 192
## 17 18 19 20 22 23 24 25 26 27 28 30 32 33 35 36
## 48 31 59 3 50 7 80 5 8 32 36 1 1 1 2 16
## 37 38 39 40 41 42 43 44 46 47 NA's
## 8 58 26 27 32 11 3 1 1 1 2676
observed corr & cov/var matrices.
# take a look at the observed correlation matrix.
cor_matrix <- cor(data[, c("in501rer", "in502rer", "in503rer", "in504rer", "in505rer", "in506rer", "in507rer")], use = "complete", method = "pearson")
print(cor_matrix)
## in501rer in502rer in503rer in504rer in505rer in506rer in507rer
## in501rer 1.0000000 0.2792627 0.3178501 0.3187617 0.3245953 0.2274303 0.2614723
## in502rer 0.2792627 1.0000000 0.3957867 0.4068193 0.3168857 0.2216130 0.2816966
## in503rer 0.3178501 0.3957867 1.0000000 0.3038079 0.2239655 0.1543646 0.2044126
## in504rer 0.3187617 0.4068193 0.3038079 1.0000000 0.6495276 0.3410393 0.3231119
## in505rer 0.3245953 0.3168857 0.2239655 0.6495276 1.0000000 0.4479959 0.3972244
## in506rer 0.2274303 0.2216130 0.1543646 0.3410393 0.4479959 1.0000000 0.5039401
## in507rer 0.2614723 0.2816966 0.2044126 0.3231119 0.3972244 0.5039401 1.0000000
### correlation between volunteer identity and group/organization identity is pretty high compared to the others. correlations among factor 1 variables are not all that much higher than the correlations between factor 1 variables and factor 2 variables, but correlations among the factor 2 variables do appear to be a bit higher than correlations between the factor 2 and factor 1 variables.
# covariance matrix
cov_matrix <- cov(data[, c("in501rer", "in502rer", "in503rer", "in504rer", "in505rer", "in506rer", "in507rer")], use = "complete")
print(cov_matrix)
## in501rer in502rer in503rer in504rer in505rer in506rer in507rer
## in501rer 3.4519497 1.0836549 0.8668438 1.0220569 1.0973510 0.7619236 0.9173476
## in502rer 1.0836549 4.3620590 1.2133700 1.4663040 1.2042580 0.8345877 1.1109728
## in503rer 0.8668438 1.2133700 2.1546295 0.7695947 0.5981891 0.4085685 0.5665912
## in504rer 1.0220569 1.4663040 0.7695947 2.9781975 2.0396021 1.0612363 1.0529450
## in505rer 1.0973510 1.2042580 0.5981891 2.0396021 3.3108706 1.4698602 1.3648441
## in506rer 0.7619236 0.8345877 0.4085685 1.0612363 1.4698602 3.2513359 1.7158757
## in507rer 0.9173476 1.1109728 0.5665912 1.0529450 1.3648441 1.7158757 3.5657587
two-factor model.
# start by fitting a two-factor model.
model_2f <- "
F1 = ~ in501rer + in502rer + in503rer
F2 = ~ in504rer + in505rer + in506rer + in507rer"
# run the CFA and take a look at the fit indices.
model_2f_fit <- cfa(model_2f, data = data)
summary(model_2f_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.14 ended normally after 37 iterations
##
## Estimator ML
## Optimization method NLMINB
## Number of model parameters 15
##
## Used Total
## Number of observations 6312 9688
##
## Model Test User Model:
##
## Test statistic 1283.951
## Degrees of freedom 13
## P-value (Chi-square) 0.000
##
## Model Test Baseline Model:
##
## Test statistic 11105.204
## Degrees of freedom 21
## P-value 0.000
##
## User Model versus Baseline Model:
##
## Comparative Fit Index (CFI) 0.885
## Tucker-Lewis Index (TLI) 0.815
##
## Loglikelihood and Information Criteria:
##
## Loglikelihood user model (H0) -83717.758
## Loglikelihood unrestricted model (H1) -83075.783
##
## Akaike (AIC) 167465.517
## Bayesian (BIC) 167566.770
## Sample-size adjusted Bayesian (SABIC) 167519.104
##
## Root Mean Square Error of Approximation:
##
## RMSEA 0.124
## 90 Percent confidence interval - lower 0.119
## 90 Percent confidence interval - upper 0.130
## P-value H_0: RMSEA <= 0.050 0.000
## P-value H_0: RMSEA >= 0.080 1.000
##
## Standardized Root Mean Square Residual:
##
## SRMR 0.058
##
## Parameter Estimates:
##
## Standard errors Standard
## Information Expected
## Information saturated (h1) model Structured
##
## Latent Variables:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 =~
## in501rer 1.000 0.984 0.530
## in502rer 1.352 0.047 28.747 0.000 1.330 0.637
## in503rer 0.839 0.030 27.522 0.000 0.825 0.562
## F2 =~
## in504rer 1.000 1.315 0.762
## in505rer 1.122 0.021 52.958 0.000 1.475 0.811
## in506rer 0.754 0.019 39.452 0.000 0.991 0.550
## in507rer 0.755 0.020 37.750 0.000 0.992 0.526
##
## Covariances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 ~~
## F2 0.896 0.035 25.726 0.000 0.693 0.693
##
## Variances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## .in501rer 2.484 0.054 45.658 0.000 2.484 0.720
## .in502rer 2.594 0.069 37.437 0.000 2.594 0.595
## .in503rer 1.474 0.034 43.616 0.000 1.474 0.684
## .in504rer 1.249 0.034 36.875 0.000 1.249 0.419
## .in505rer 1.134 0.037 30.436 0.000 1.134 0.342
## .in506rer 2.269 0.045 50.640 0.000 2.269 0.698
## .in507rer 2.580 0.050 51.314 0.000 2.580 0.724
## F1 0.968 0.053 18.210 0.000 1.000 1.000
## F2 1.729 0.054 31.734 0.000 1.000 1.000
### none of the fit indices are looking too good...chi-square is very large for only 13 degrees of freedom, CFI & TLI do not reach the 0.95 threshold, and the RMSEA does not fall below the .06 threshold
# visualization of the model.
semPaths(model_2f_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_2f <- fitted(model_2f_fit)
exp_matrix_2f
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 3.451
## in502rer 1.308 4.361
## in503rer 0.812 1.097 2.154
## in504rer 0.896 1.211 0.751 2.978
## in505rer 1.005 1.359 0.843 1.940 3.310
## in506rer 0.675 0.913 0.566 1.303 1.462 3.251
## in507rer 0.676 0.914 0.567 1.305 1.464 0.984 3.565
resid_matrix_2f <- resid(model_2f_fit)
resid_matrix_2f
## $type
## [1] "raw"
##
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 0.000
## in502rer -0.225 0.000
## in503rer 0.055 0.116 0.000
## in504rer 0.126 0.255 0.018 0.000
## in505rer 0.092 -0.155 -0.245 0.099 0.000
## in506rer 0.086 -0.078 -0.158 -0.242 0.007 0.000
## in507rer 0.241 0.197 -0.001 -0.252 -0.100 0.732 0.000
one-factor model.
# let's see if the one-factor model fits better than the two-factor model.
model_1f <- "
F1 = ~ in501rer + in502rer + in503rer + in504rer + in505rer + in506rer + in507rer"
# run the CFA and take a look at the fit indices.
model_1f_fit <- cfa(model_1f, data = data)
summary(model_1f_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.14 ended normally after 33 iterations
##
## Estimator ML
## Optimization method NLMINB
## Number of model parameters 14
##
## Used Total
## Number of observations 6312 9688
##
## Model Test User Model:
##
## Test statistic 1858.735
## Degrees of freedom 14
## P-value (Chi-square) 0.000
##
## Model Test Baseline Model:
##
## Test statistic 11105.204
## Degrees of freedom 21
## P-value 0.000
##
## User Model versus Baseline Model:
##
## Comparative Fit Index (CFI) 0.834
## Tucker-Lewis Index (TLI) 0.750
##
## Loglikelihood and Information Criteria:
##
## Loglikelihood user model (H0) -84005.150
## Loglikelihood unrestricted model (H1) -83075.783
##
## Akaike (AIC) 168038.301
## Bayesian (BIC) 168132.804
## Sample-size adjusted Bayesian (SABIC) 168088.315
##
## Root Mean Square Error of Approximation:
##
## RMSEA 0.144
## 90 Percent confidence interval - lower 0.139
## 90 Percent confidence interval - upper 0.150
## P-value H_0: RMSEA <= 0.050 0.000
## P-value H_0: RMSEA >= 0.080 1.000
##
## Standardized Root Mean Square Residual:
##
## SRMR 0.072
##
## Parameter Estimates:
##
## Standard errors Standard
## Information Expected
## Information saturated (h1) model Structured
##
## Latent Variables:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 =~
## in501rer 1.000 0.840 0.452
## in502rer 1.241 0.046 26.990 0.000 1.042 0.499
## in503rer 0.689 0.030 23.317 0.000 0.579 0.394
## in504rer 1.563 0.048 32.499 0.000 1.312 0.760
## in505rer 1.693 0.052 32.716 0.000 1.421 0.781
## in506rer 1.170 0.041 28.303 0.000 0.982 0.545
## in507rer 1.198 0.043 27.973 0.000 1.006 0.533
##
## Variances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## .in501rer 2.746 0.052 52.954 0.000 2.746 0.796
## .in502rer 3.276 0.063 51.999 0.000 3.276 0.751
## .in503rer 1.820 0.034 53.875 0.000 1.820 0.845
## .in504rer 1.256 0.033 38.064 0.000 1.256 0.422
## .in505rer 1.291 0.036 35.663 0.000 1.291 0.390
## .in506rer 2.286 0.045 50.833 0.000 2.286 0.703
## .in507rer 2.554 0.050 51.167 0.000 2.554 0.716
## F1 0.705 0.041 17.178 0.000 1.000 1.000
### chi-squared is larger than the two-factor model, CFI and TLI are both smaller than the two-factor model, AIC and BIC are both larger than the two-factor model, and RMSEA is larger than the two-factor model. so we gained one degree of freedom, but fit worsened.
# visualization of the model.
semPaths(model_1f_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_1f <- fitted(model_1f_fit)
exp_matrix_1f
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 3.451
## in502rer 0.875 4.361
## in503rer 0.486 0.603 2.154
## in504rer 1.102 1.367 0.759 2.978
## in505rer 1.193 1.481 0.822 1.865 3.310
## in506rer 0.825 1.023 0.568 1.289 1.396 3.251
## in507rer 0.845 1.048 0.582 1.320 1.429 0.988 3.565
resid_matrix_1f <- resid(model_1f_fit)
resid_matrix_1f
## $type
## [1] "raw"
##
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 0.000
## in502rer 0.209 0.000
## in503rer 0.381 0.610 0.000
## in504rer -0.080 0.099 0.010 0.000
## in505rer -0.096 -0.277 -0.224 0.175 0.000
## in506rer -0.063 -0.189 -0.160 -0.228 0.074 0.000
## in507rer 0.073 0.063 -0.015 -0.267 -0.065 0.728 0.000
two-factor model – vol & org equated.
# since volunteer identity and group/organization identity had the highest correlation on in the observed correlation matrix, i'm going to try equating them in the model so see if that improves fit.
model_2fEQ <- "
F1 = ~ in501rer + in502rer + in503rer
F2 = ~ a*in504rer + a*in505rer + in506rer + in507rer"
# run the CFA and take a look at the fit indices.
model_2fEQ_fit <- cfa(model_2fEQ, data = data)
summary(model_2fEQ_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.14 ended normally after 35 iterations
##
## Estimator ML
## Optimization method NLMINB
## Number of model parameters 14
##
## Used Total
## Number of observations 6312 9688
##
## Model Test User Model:
##
## Test statistic 1325.712
## Degrees of freedom 14
## P-value (Chi-square) 0.000
##
## Model Test Baseline Model:
##
## Test statistic 11105.204
## Degrees of freedom 21
## P-value 0.000
##
## User Model versus Baseline Model:
##
## Comparative Fit Index (CFI) 0.882
## Tucker-Lewis Index (TLI) 0.822
##
## Loglikelihood and Information Criteria:
##
## Loglikelihood user model (H0) -83738.639
## Loglikelihood unrestricted model (H1) -83075.783
##
## Akaike (AIC) 167505.277
## Bayesian (BIC) 167599.780
## Sample-size adjusted Bayesian (SABIC) 167555.292
##
## Root Mean Square Error of Approximation:
##
## RMSEA 0.122
## 90 Percent confidence interval - lower 0.116
## 90 Percent confidence interval - upper 0.127
## P-value H_0: RMSEA <= 0.050 0.000
## P-value H_0: RMSEA >= 0.080 1.000
##
## Standardized Root Mean Square Residual:
##
## SRMR 0.060
##
## Parameter Estimates:
##
## Standard errors Standard
## Information Expected
## Information saturated (h1) model Structured
##
## Latent Variables:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 =~
## in501rer 1.000 0.980 0.527
## in502rer 1.362 0.047 28.878 0.000 1.334 0.639
## in503rer 0.841 0.031 27.584 0.000 0.825 0.562
## F2 =~
## in504rer (a) 1.000 1.392 0.789
## in505rer (a) 1.000 1.392 0.782
## in506rer 0.705 0.017 42.327 0.000 0.982 0.544
## in507rer 0.710 0.018 40.436 0.000 0.988 0.523
##
## Covariances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 ~~
## F2 0.959 0.036 26.914 0.000 0.703 0.703
##
## Variances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## .in501rer 2.491 0.054 45.918 0.000 2.491 0.722
## .in502rer 2.581 0.069 37.432 0.000 2.581 0.592
## .in503rer 1.474 0.034 43.806 0.000 1.474 0.684
## .in504rer 1.175 0.031 37.714 0.000 1.175 0.378
## .in505rer 1.233 0.032 38.626 0.000 1.233 0.389
## .in506rer 2.287 0.045 50.713 0.000 2.287 0.704
## .in507rer 2.589 0.050 51.303 0.000 2.589 0.726
## F1 0.960 0.053 18.193 0.000 1.000 1.000
## F2 1.937 0.046 41.957 0.000 1.000 1.000
### the chi-square is a little higher than the original two-factor model, the AIC and BIC are a little higher than the original two-factor model, the CFI is a little lower than the original two-factor model but the BIC is a tad higher than the original two-factor model, and the RMSEA is a tad lower. overall, wouldn't say this is a better fit than the original two-factor model, despite gaining one degree of freedom.
# visualization of the model.
semPaths(model_2fEQ_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_2fs <- fitted(model_2fEQ_fit)
exp_matrix_2fs
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 3.451
## in502rer 1.308 4.361
## in503rer 0.808 1.100 2.154
## in504rer 0.959 1.306 0.807 3.112
## in505rer 0.959 1.306 0.807 1.937 3.170
## in506rer 0.676 0.921 0.569 1.366 1.366 3.251
## in507rer 0.681 0.927 0.573 1.375 1.375 0.970 3.565
resid_matrix_2fs <- resid(model_2fEQ_fit)
resid_matrix_2fs
## $type
## [1] "raw"
##
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 0.000
## in502rer -0.224 0.000
## in503rer 0.059 0.113 0.000
## in504rer 0.063 0.160 -0.037 -0.134
## in505rer 0.138 -0.102 -0.209 0.103 0.141
## in506rer 0.085 -0.087 -0.161 -0.305 0.103 0.000
## in507rer 0.236 0.184 -0.006 -0.322 -0.010 0.746 0.000
two-factor model – vol dropped.
# instead of equating volunteer identity and group/organization identity, i'm going to try dropping volunteer identity from the model to see if that improves fit.
model_2fD <- "
F1 = ~ in501rer + in502rer + in503rer
F2 = ~ in505rer + in506rer + in507rer"
# run the CFA and take a look at the fit indices.
model_2fD_fit <- cfa(model_2fD, data = data)
summary(model_2fD_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.14 ended normally after 39 iterations
##
## Estimator ML
## Optimization method NLMINB
## Number of model parameters 13
##
## Used Total
## Number of observations 6335 9688
##
## Model Test User Model:
##
## Test statistic 388.494
## Degrees of freedom 8
## P-value (Chi-square) 0.000
##
## Model Test Baseline Model:
##
## Test statistic 7007.870
## Degrees of freedom 15
## P-value 0.000
##
## User Model versus Baseline Model:
##
## Comparative Fit Index (CFI) 0.946
## Tucker-Lewis Index (TLI) 0.898
##
## Loglikelihood and Information Criteria:
##
## Loglikelihood user model (H0) -73202.829
## Loglikelihood unrestricted model (H1) -73008.582
##
## Akaike (AIC) 146431.659
## Bayesian (BIC) 146519.459
## Sample-size adjusted Bayesian (SABIC) 146478.148
##
## Root Mean Square Error of Approximation:
##
## RMSEA 0.087
## 90 Percent confidence interval - lower 0.079
## 90 Percent confidence interval - upper 0.094
## P-value H_0: RMSEA <= 0.050 0.000
## P-value H_0: RMSEA >= 0.080 0.935
##
## Standardized Root Mean Square Residual:
##
## SRMR 0.043
##
## Parameter Estimates:
##
## Standard errors Standard
## Information Expected
## Information saturated (h1) model Structured
##
## Latent Variables:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 =~
## in501rer 1.000 0.984 0.530
## in502rer 1.327 0.049 26.928 0.000 1.306 0.625
## in503rer 0.859 0.032 26.466 0.000 0.845 0.576
## F2 =~
## in505rer 1.000 1.168 0.642
## in506rer 1.073 0.029 37.039 0.000 1.253 0.695
## in507rer 1.104 0.030 36.901 0.000 1.289 0.683
##
## Covariances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## F1 ~~
## F2 0.713 0.032 22.377 0.000 0.620 0.620
##
## Variances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## .in501rer 2.483 0.056 44.243 0.000 2.483 0.719
## .in502rer 2.656 0.073 36.274 0.000 2.656 0.609
## .in503rer 1.440 0.035 40.798 0.000 1.440 0.668
## .in505rer 1.949 0.047 41.374 0.000 1.949 0.588
## .in506rer 1.683 0.046 36.255 0.000 1.683 0.517
## .in507rer 1.905 0.051 37.511 0.000 1.905 0.534
## F1 0.968 0.055 17.629 0.000 1.000 1.000
## F2 1.364 0.057 23.794 0.000 1.000 1.000
### chi-square is still significant, but again, we have a large sample size. the AIC and BIC are quite a bit lower than the original two-factor model. the CFI does not reach the 0.95 threshold but is close! the TLI still does not reach the 0.95 threshold. the RMSEA still does not fall below the 0.06 threshold. this model fits a bit better than the others, and is probably the best fit overall.
# visualization of the model.
semPaths(model_2fD_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_2fd <- fitted(model_2fD_fit)
exp_matrix_2fd
## $cov
## in501r in502r in503r in505r in506r in507r
## in501rer 3.451
## in502rer 1.285 4.362
## in503rer 0.832 1.104 2.154
## in505rer 0.713 0.946 0.612 3.313
## in506rer 0.765 1.015 0.657 1.463 3.253
## in507rer 0.787 1.045 0.676 1.506 1.615 3.568
resid_matrix_2fd <- resid(model_2fD_fit)
resid_matrix_2fd
## $type
## [1] "raw"
##
## $cov
## in501r in502r in503r in505r in506r in507r
## in501rer 0.000
## in502rer -0.199 0.000
## in503rer 0.035 0.106 0.000
## in505rer 0.382 0.259 -0.017 0.000
## in506rer -0.001 -0.177 -0.249 0.009 0.000
## in507rer 0.131 0.066 -0.111 -0.137 0.102 0.000
null model.
# lastly, just gonna take a look at the null model to cover all bases.
null_model <- "
in501rer ~~ in501rer
in502rer ~~ in502rer
in503rer ~~ in503rer
in504rer ~~ in504rer
in505rer ~~ in505rer
in506rer ~~ in506rer
in507rer ~~ in507rer"
# run the CFA and take a look at the fit indices.
null_model_fit <- cfa(null_model, data = data)
summary(null_model_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.14 ended normally after 9 iterations
##
## Estimator ML
## Optimization method NLMINB
## Number of model parameters 7
##
## Used Total
## Number of observations 6312 9688
##
## Model Test User Model:
##
## Test statistic 11105.204
## Degrees of freedom 21
## P-value (Chi-square) 0.000
##
## Model Test Baseline Model:
##
## Test statistic 11105.204
## Degrees of freedom 21
## P-value 0.000
##
## User Model versus Baseline Model:
##
## Comparative Fit Index (CFI) 0.000
## Tucker-Lewis Index (TLI) 0.000
##
## Loglikelihood and Information Criteria:
##
## Loglikelihood user model (H0) -88628.385
## Loglikelihood unrestricted model (H1) -83075.783
##
## Akaike (AIC) 177270.770
## Bayesian (BIC) 177318.022
## Sample-size adjusted Bayesian (SABIC) 177295.778
##
## Root Mean Square Error of Approximation:
##
## RMSEA 0.289
## 90 Percent confidence interval - lower 0.285
## 90 Percent confidence interval - upper 0.294
## P-value H_0: RMSEA <= 0.050 0.000
## P-value H_0: RMSEA >= 0.080 1.000
##
## Standardized Root Mean Square Residual:
##
## SRMR 0.300
##
## Parameter Estimates:
##
## Standard errors Standard
## Information Expected
## Information saturated (h1) model Structured
##
## Variances:
## Estimate Std.Err z-value P(>|z|) Std.lv Std.all
## in501rer 3.451 0.061 56.178 0.000 3.451 1.000
## in502rer 4.361 0.078 56.178 0.000 4.361 1.000
## in503rer 2.154 0.038 56.178 0.000 2.154 1.000
## in504rer 2.978 0.053 56.178 0.000 2.978 1.000
## in505rer 3.310 0.059 56.178 0.000 3.310 1.000
## in506rer 3.251 0.058 56.178 0.000 3.251 1.000
## in507rer 3.565 0.063 56.178 0.000 3.565 1.000
### chi-square is much higher than the original two-factor model and we lost 6 degrees of freedom. AIC and BIC are higher than the original two-factor model, CFI and TLI are 0, and RMSEA is much higher than the original two-factor model.
# visualization of the model.
semPaths(null_model_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_null <- fitted(null_model_fit)
exp_matrix_null
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 3.451
## in502rer 0.000 4.361
## in503rer 0.000 0.000 2.154
## in504rer 0.000 0.000 0.000 2.978
## in505rer 0.000 0.000 0.000 0.000 3.310
## in506rer 0.000 0.000 0.000 0.000 0.000 3.251
## in507rer 0.000 0.000 0.000 0.000 0.000 0.000 3.565
resid_matrix_null <- resid(null_model_fit)
resid_matrix_null
## $type
## [1] "raw"
##
## $cov
## in501r in502r in503r in504r in505r in506r in507r
## in501rer 0.000
## in502rer 1.083 0.000
## in503rer 0.867 1.213 0.000
## in504rer 1.022 1.466 0.769 0.000
## in505rer 1.097 1.204 0.598 2.039 0.000
## in506rer 0.762 0.834 0.409 1.061 1.470 0.000
## in507rer 0.917 1.111 0.567 1.053 1.365 1.716 0.000