load libraries.

library(psych)
library(lavaan)
## This is lavaan 0.6-15
## lavaan is FREE software! Please report any bugs.
## 
## Attaching package: 'lavaan'
## The following object is masked from 'package:psych':
## 
##     cor2cov
library(semTools)
## 
## ###############################################################################
## This is semTools 0.5-6
## All users of R (or SEM) are invited to submit functions or ideas for functions.
## ###############################################################################
## 
## Attaching package: 'semTools'
## The following objects are masked from 'package:psych':
## 
##     reliability, skew
library(semPlot)
library(dplyr)
## 
## Attaching package: 'dplyr'
## The following objects are masked from 'package:stats':
## 
##     filter, lag
## The following objects are masked from 'package:base':
## 
##     intersect, setdiff, setequal, union
library(tidyverse)
## ── Attaching packages
## ───────────────────────────────────────
## tidyverse 1.3.2 ──
## ✔ ggplot2 3.4.0     ✔ purrr   0.3.4
## ✔ tibble  3.1.8     ✔ stringr 1.4.1
## ✔ tidyr   1.2.1     ✔ forcats 0.5.2
## ✔ readr   2.1.2     
## ── Conflicts ────────────────────────────────────────── tidyverse_conflicts() ──
## ✖ ggplot2::%+%()     masks psych::%+%()
## ✖ ggplot2::alpha()   masks psych::alpha()
## ✖ readr::clipboard() masks semTools::clipboard()
## ✖ dplyr::filter()    masks stats::filter()
## ✖ dplyr::lag()       masks stats::lag()

load data.

data <- read.csv("~/okara004@ucr.edu - Google Drive/My Drive/classes/3 -- spring '23/PSYC 214 -- stats/homework/HW #1/HW1_Data/WLS_HW1_CFA_rev23.csv")

get descriptives.

# gender
gender <- factor(data$sexrsp, levels = 1:2, labels = c("Male", "Female"))
summary(gender)
##   Male Female 
##   4637   5051
4637 + 5051 ### = 9688
## [1] 9688
5051/9688 ### = 0.5213666, 52.14% female
## [1] 0.5213666
# age
data <- mutate(data, Age = 103-(data$byear)) 
psych::describe(data$Age) ### mean age: 64.16yrs; SD: 0.51yrs
##    vars    n  mean   sd median trimmed mad min max range skew kurtosis   se
## X1    1 9688 64.16 0.51     64    64.1   0  63  66     3  1.1     2.71 0.01
# education
data$educ92 <- as.numeric(data$educ92)
psych::describe(data$educ92) ### mean: 13.61 (about 1yr of college); SD: 2.26yrs
##    vars    n  mean   sd median trimmed mad min max range skew kurtosis   se
## X1    1 8452 13.61 2.26     12   13.21   0  12  21     9 1.14     0.04 0.02
# nationality on father's side
glimpse(data$ge096fa)
##  int [1:9688] NA 14 4 NA 2 14 14 NA 14 14 ...
data$ge096fa <- as.factor(data$ge096fa)
summary(data$ge096fa) ### primarily european
##    1    2    3    4    5    6    7    8    9   10   11   12   13   14   15   16 
##  633  108   52  463  549  166  128  182    6   82   81  231    4 3417  474  202 
##   17   18   19   20   22   23   24   25   26   27   28   29   30   31   32   33 
##   43   21   47    4   20   10   91    3    8   21   55    2    1    1    1    1 
##   34   35   36   37   38   39   40   41   42 NA's 
##    1    5   16   11   20    9   16   11    4 2488
# nationality on mother's side
glimpse(data$ge095ma)
##  int [1:9688] NA 4 1 NA 41 14 4 NA 14 14 ...
data$ge095ma <- as.factor(data$ge095ma)
summary(data$ge095ma) ### also primarily european
##    1    2    3    4    5    6    7    8    9   10   11   12   13   14   15   16 
##  622   91   38  495  554  151  104  168   28   75   81  218   14 3106  527  192 
##   17   18   19   20   22   23   24   25   26   27   28   30   32   33   35   36 
##   48   31   59    3   50    7   80    5    8   32   36    1    1    1    2   16 
##   37   38   39   40   41   42   43   44   46   47 NA's 
##    8   58   26   27   32   11    3    1    1    1 2676

observed corr & cov/var matrices.

# take a look at the observed correlation matrix.
cor_matrix <- cor(data[, c("in501rer", "in502rer", "in503rer", "in504rer", "in505rer", "in506rer", "in507rer")], use = "complete", method = "pearson")
print(cor_matrix)
##           in501rer  in502rer  in503rer  in504rer  in505rer  in506rer  in507rer
## in501rer 1.0000000 0.2792627 0.3178501 0.3187617 0.3245953 0.2274303 0.2614723
## in502rer 0.2792627 1.0000000 0.3957867 0.4068193 0.3168857 0.2216130 0.2816966
## in503rer 0.3178501 0.3957867 1.0000000 0.3038079 0.2239655 0.1543646 0.2044126
## in504rer 0.3187617 0.4068193 0.3038079 1.0000000 0.6495276 0.3410393 0.3231119
## in505rer 0.3245953 0.3168857 0.2239655 0.6495276 1.0000000 0.4479959 0.3972244
## in506rer 0.2274303 0.2216130 0.1543646 0.3410393 0.4479959 1.0000000 0.5039401
## in507rer 0.2614723 0.2816966 0.2044126 0.3231119 0.3972244 0.5039401 1.0000000
### correlation between volunteer identity and group/organization identity is pretty high compared to the others. correlations among factor 1 variables are not all that much higher than the correlations between factor 1 variables and factor 2 variables, but correlations among the factor 2 variables do appear to be a bit higher than correlations between the factor 2 and factor 1 variables.

# covariance matrix
cov_matrix <- cov(data[, c("in501rer", "in502rer", "in503rer", "in504rer", "in505rer", "in506rer", "in507rer")], use = "complete")
print(cov_matrix)
##           in501rer  in502rer  in503rer  in504rer  in505rer  in506rer  in507rer
## in501rer 3.4519497 1.0836549 0.8668438 1.0220569 1.0973510 0.7619236 0.9173476
## in502rer 1.0836549 4.3620590 1.2133700 1.4663040 1.2042580 0.8345877 1.1109728
## in503rer 0.8668438 1.2133700 2.1546295 0.7695947 0.5981891 0.4085685 0.5665912
## in504rer 1.0220569 1.4663040 0.7695947 2.9781975 2.0396021 1.0612363 1.0529450
## in505rer 1.0973510 1.2042580 0.5981891 2.0396021 3.3108706 1.4698602 1.3648441
## in506rer 0.7619236 0.8345877 0.4085685 1.0612363 1.4698602 3.2513359 1.7158757
## in507rer 0.9173476 1.1109728 0.5665912 1.0529450 1.3648441 1.7158757 3.5657587

two-factor model.

# start by fitting a two-factor model.
model_2f <- "
  F1 = ~ in501rer + in502rer + in503rer
  F2 = ~ in504rer + in505rer + in506rer + in507rer"

# run the CFA and take a look at the fit indices.
model_2f_fit <- cfa(model_2f, data = data)
summary(model_2f_fit, standard = TRUE, fit.measures = TRUE) 
## lavaan 0.6.15 ended normally after 37 iterations
## 
##   Estimator                                         ML
##   Optimization method                           NLMINB
##   Number of model parameters                        15
## 
##                                                   Used       Total
##   Number of observations                          6312        9688
## 
## Model Test User Model:
##                                                       
##   Test statistic                              1283.951
##   Degrees of freedom                                13
##   P-value (Chi-square)                           0.000
## 
## Model Test Baseline Model:
## 
##   Test statistic                             11105.204
##   Degrees of freedom                                21
##   P-value                                        0.000
## 
## User Model versus Baseline Model:
## 
##   Comparative Fit Index (CFI)                    0.885
##   Tucker-Lewis Index (TLI)                       0.815
## 
## Loglikelihood and Information Criteria:
## 
##   Loglikelihood user model (H0)             -83717.758
##   Loglikelihood unrestricted model (H1)     -83075.783
##                                                       
##   Akaike (AIC)                              167465.517
##   Bayesian (BIC)                            167566.770
##   Sample-size adjusted Bayesian (SABIC)     167519.104
## 
## Root Mean Square Error of Approximation:
## 
##   RMSEA                                          0.124
##   90 Percent confidence interval - lower         0.119
##   90 Percent confidence interval - upper         0.130
##   P-value H_0: RMSEA <= 0.050                    0.000
##   P-value H_0: RMSEA >= 0.080                    1.000
## 
## Standardized Root Mean Square Residual:
## 
##   SRMR                                           0.058
## 
## Parameter Estimates:
## 
##   Standard errors                             Standard
##   Information                                 Expected
##   Information saturated (h1) model          Structured
## 
## Latent Variables:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 =~                                                                 
##     in501rer          1.000                               0.984    0.530
##     in502rer          1.352    0.047   28.747    0.000    1.330    0.637
##     in503rer          0.839    0.030   27.522    0.000    0.825    0.562
##   F2 =~                                                                 
##     in504rer          1.000                               1.315    0.762
##     in505rer          1.122    0.021   52.958    0.000    1.475    0.811
##     in506rer          0.754    0.019   39.452    0.000    0.991    0.550
##     in507rer          0.755    0.020   37.750    0.000    0.992    0.526
## 
## Covariances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 ~~                                                                 
##     F2                0.896    0.035   25.726    0.000    0.693    0.693
## 
## Variances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##    .in501rer          2.484    0.054   45.658    0.000    2.484    0.720
##    .in502rer          2.594    0.069   37.437    0.000    2.594    0.595
##    .in503rer          1.474    0.034   43.616    0.000    1.474    0.684
##    .in504rer          1.249    0.034   36.875    0.000    1.249    0.419
##    .in505rer          1.134    0.037   30.436    0.000    1.134    0.342
##    .in506rer          2.269    0.045   50.640    0.000    2.269    0.698
##    .in507rer          2.580    0.050   51.314    0.000    2.580    0.724
##     F1                0.968    0.053   18.210    0.000    1.000    1.000
##     F2                1.729    0.054   31.734    0.000    1.000    1.000
### none of the fit indices are looking too good...chi-square is very large for only 13 degrees of freedom, CFI & TLI do not reach the 0.95 threshold, and the RMSEA does not fall below the .06 threshold

# visualization of the model.
semPaths(model_2f_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_2f <- fitted(model_2f_fit)
exp_matrix_2f
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  3.451                                          
## in502rer  1.308  4.361                                   
## in503rer  0.812  1.097  2.154                            
## in504rer  0.896  1.211  0.751  2.978                     
## in505rer  1.005  1.359  0.843  1.940  3.310              
## in506rer  0.675  0.913  0.566  1.303  1.462  3.251       
## in507rer  0.676  0.914  0.567  1.305  1.464  0.984  3.565
resid_matrix_2f <- resid(model_2f_fit)
resid_matrix_2f
## $type
## [1] "raw"
## 
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  0.000                                          
## in502rer -0.225  0.000                                   
## in503rer  0.055  0.116  0.000                            
## in504rer  0.126  0.255  0.018  0.000                     
## in505rer  0.092 -0.155 -0.245  0.099  0.000              
## in506rer  0.086 -0.078 -0.158 -0.242  0.007  0.000       
## in507rer  0.241  0.197 -0.001 -0.252 -0.100  0.732  0.000

one-factor model.

# let's see if the one-factor model fits better than the two-factor model.
model_1f <- "
  F1 = ~ in501rer + in502rer + in503rer + in504rer + in505rer + in506rer + in507rer"

# run the CFA and take a look at the fit indices.
model_1f_fit <- cfa(model_1f, data = data)
summary(model_1f_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.15 ended normally after 33 iterations
## 
##   Estimator                                         ML
##   Optimization method                           NLMINB
##   Number of model parameters                        14
## 
##                                                   Used       Total
##   Number of observations                          6312        9688
## 
## Model Test User Model:
##                                                       
##   Test statistic                              1858.735
##   Degrees of freedom                                14
##   P-value (Chi-square)                           0.000
## 
## Model Test Baseline Model:
## 
##   Test statistic                             11105.204
##   Degrees of freedom                                21
##   P-value                                        0.000
## 
## User Model versus Baseline Model:
## 
##   Comparative Fit Index (CFI)                    0.834
##   Tucker-Lewis Index (TLI)                       0.750
## 
## Loglikelihood and Information Criteria:
## 
##   Loglikelihood user model (H0)             -84005.150
##   Loglikelihood unrestricted model (H1)     -83075.783
##                                                       
##   Akaike (AIC)                              168038.301
##   Bayesian (BIC)                            168132.804
##   Sample-size adjusted Bayesian (SABIC)     168088.315
## 
## Root Mean Square Error of Approximation:
## 
##   RMSEA                                          0.144
##   90 Percent confidence interval - lower         0.139
##   90 Percent confidence interval - upper         0.150
##   P-value H_0: RMSEA <= 0.050                    0.000
##   P-value H_0: RMSEA >= 0.080                    1.000
## 
## Standardized Root Mean Square Residual:
## 
##   SRMR                                           0.072
## 
## Parameter Estimates:
## 
##   Standard errors                             Standard
##   Information                                 Expected
##   Information saturated (h1) model          Structured
## 
## Latent Variables:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 =~                                                                 
##     in501rer          1.000                               0.840    0.452
##     in502rer          1.241    0.046   26.990    0.000    1.042    0.499
##     in503rer          0.689    0.030   23.317    0.000    0.579    0.394
##     in504rer          1.563    0.048   32.499    0.000    1.312    0.760
##     in505rer          1.693    0.052   32.716    0.000    1.421    0.781
##     in506rer          1.170    0.041   28.303    0.000    0.982    0.545
##     in507rer          1.198    0.043   27.973    0.000    1.006    0.533
## 
## Variances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##    .in501rer          2.746    0.052   52.954    0.000    2.746    0.796
##    .in502rer          3.276    0.063   51.999    0.000    3.276    0.751
##    .in503rer          1.820    0.034   53.875    0.000    1.820    0.845
##    .in504rer          1.256    0.033   38.064    0.000    1.256    0.422
##    .in505rer          1.291    0.036   35.663    0.000    1.291    0.390
##    .in506rer          2.286    0.045   50.833    0.000    2.286    0.703
##    .in507rer          2.554    0.050   51.167    0.000    2.554    0.716
##     F1                0.705    0.041   17.178    0.000    1.000    1.000
### chi-squared is larger than the two-factor model, CFI and TLI are both smaller than the two-factor model, AIC and BIC are both larger than the two-factor model, and RMSEA is larger than the two-factor model. so we gained one degree of freedom, but fit worsened.

# visualization of the model.
semPaths(model_1f_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_1f <- fitted(model_1f_fit)
exp_matrix_1f
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  3.451                                          
## in502rer  0.875  4.361                                   
## in503rer  0.486  0.603  2.154                            
## in504rer  1.102  1.367  0.759  2.978                     
## in505rer  1.193  1.481  0.822  1.865  3.310              
## in506rer  0.825  1.023  0.568  1.289  1.396  3.251       
## in507rer  0.845  1.048  0.582  1.320  1.429  0.988  3.565
resid_matrix_1f <- resid(model_1f_fit)
resid_matrix_1f
## $type
## [1] "raw"
## 
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  0.000                                          
## in502rer  0.209  0.000                                   
## in503rer  0.381  0.610  0.000                            
## in504rer -0.080  0.099  0.010  0.000                     
## in505rer -0.096 -0.277 -0.224  0.175  0.000              
## in506rer -0.063 -0.189 -0.160 -0.228  0.074  0.000       
## in507rer  0.073  0.063 -0.015 -0.267 -0.065  0.728  0.000

two-factor model – vol & org equated.

# since volunteer identity and group/organization identity had the highest correlation on in the observed correlation matrix, i'm going to try equating them in the model so see if that improves fit.
model_2fEQ <- "
  F1 = ~ in501rer + in502rer + in503rer
  F2 = ~ a*in504rer + a*in505rer + in506rer + in507rer"

# run the CFA and take a look at the fit indices.
model_2fEQ_fit <- cfa(model_2fEQ, data = data)
summary(model_2fEQ_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.15 ended normally after 35 iterations
## 
##   Estimator                                         ML
##   Optimization method                           NLMINB
##   Number of model parameters                        14
## 
##                                                   Used       Total
##   Number of observations                          6312        9688
## 
## Model Test User Model:
##                                                       
##   Test statistic                              1325.712
##   Degrees of freedom                                14
##   P-value (Chi-square)                           0.000
## 
## Model Test Baseline Model:
## 
##   Test statistic                             11105.204
##   Degrees of freedom                                21
##   P-value                                        0.000
## 
## User Model versus Baseline Model:
## 
##   Comparative Fit Index (CFI)                    0.882
##   Tucker-Lewis Index (TLI)                       0.822
## 
## Loglikelihood and Information Criteria:
## 
##   Loglikelihood user model (H0)             -83738.639
##   Loglikelihood unrestricted model (H1)     -83075.783
##                                                       
##   Akaike (AIC)                              167505.277
##   Bayesian (BIC)                            167599.780
##   Sample-size adjusted Bayesian (SABIC)     167555.292
## 
## Root Mean Square Error of Approximation:
## 
##   RMSEA                                          0.122
##   90 Percent confidence interval - lower         0.116
##   90 Percent confidence interval - upper         0.127
##   P-value H_0: RMSEA <= 0.050                    0.000
##   P-value H_0: RMSEA >= 0.080                    1.000
## 
## Standardized Root Mean Square Residual:
## 
##   SRMR                                           0.060
## 
## Parameter Estimates:
## 
##   Standard errors                             Standard
##   Information                                 Expected
##   Information saturated (h1) model          Structured
## 
## Latent Variables:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 =~                                                                 
##     in501rer          1.000                               0.980    0.527
##     in502rer          1.362    0.047   28.878    0.000    1.334    0.639
##     in503rer          0.841    0.031   27.584    0.000    0.825    0.562
##   F2 =~                                                                 
##     in504rer   (a)    1.000                               1.392    0.789
##     in505rer   (a)    1.000                               1.392    0.782
##     in506rer          0.705    0.017   42.327    0.000    0.982    0.544
##     in507rer          0.710    0.018   40.436    0.000    0.988    0.523
## 
## Covariances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 ~~                                                                 
##     F2                0.959    0.036   26.914    0.000    0.703    0.703
## 
## Variances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##    .in501rer          2.491    0.054   45.918    0.000    2.491    0.722
##    .in502rer          2.581    0.069   37.432    0.000    2.581    0.592
##    .in503rer          1.474    0.034   43.806    0.000    1.474    0.684
##    .in504rer          1.175    0.031   37.714    0.000    1.175    0.378
##    .in505rer          1.233    0.032   38.626    0.000    1.233    0.389
##    .in506rer          2.287    0.045   50.713    0.000    2.287    0.704
##    .in507rer          2.589    0.050   51.303    0.000    2.589    0.726
##     F1                0.960    0.053   18.193    0.000    1.000    1.000
##     F2                1.937    0.046   41.957    0.000    1.000    1.000
### the chi-square is a little higher than the original two-factor model, the AIC and BIC are a little higher than the original two-factor model, the CFI is a little lower than the original two-factor model but the BIC is a tad higher than the original two-factor model, and the RMSEA is a tad lower. overall, wouldn't say this is a better fit than the original two-factor model, despite gaining one degree of freedom.

# visualization of the model.
semPaths(model_2fEQ_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_2fs <- fitted(model_2fEQ_fit)
exp_matrix_2fs
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  3.451                                          
## in502rer  1.308  4.361                                   
## in503rer  0.808  1.100  2.154                            
## in504rer  0.959  1.306  0.807  3.112                     
## in505rer  0.959  1.306  0.807  1.937  3.170              
## in506rer  0.676  0.921  0.569  1.366  1.366  3.251       
## in507rer  0.681  0.927  0.573  1.375  1.375  0.970  3.565
resid_matrix_2fs <- resid(model_2fEQ_fit)
resid_matrix_2fs
## $type
## [1] "raw"
## 
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  0.000                                          
## in502rer -0.224  0.000                                   
## in503rer  0.059  0.113  0.000                            
## in504rer  0.063  0.160 -0.037 -0.134                     
## in505rer  0.138 -0.102 -0.209  0.103  0.141              
## in506rer  0.085 -0.087 -0.161 -0.305  0.103  0.000       
## in507rer  0.236  0.184 -0.006 -0.322 -0.010  0.746  0.000

two-factor model – org dropped.

# instead of equating volunteer identity and group/organization identity, i'm going to try dropping group/organization identity from the model to see if that improves fit.
model_2fD <- "
  F1 = ~ in501rer + in502rer + in503rer
  F2 = ~ in504rer + in506rer + in507rer"

# run the CFA and take a look at the fit indices.
model_2fD_fit <- cfa(model_2fD, data = data)
summary(model_2fD_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.15 ended normally after 40 iterations
## 
##   Estimator                                         ML
##   Optimization method                           NLMINB
##   Number of model parameters                        13
## 
##                                                   Used       Total
##   Number of observations                          6362        9688
## 
## Model Test User Model:
##                                                       
##   Test statistic                               743.305
##   Degrees of freedom                                 8
##   P-value (Chi-square)                           0.000
## 
## Model Test Baseline Model:
## 
##   Test statistic                              6819.818
##   Degrees of freedom                                15
##   P-value                                        0.000
## 
## User Model versus Baseline Model:
## 
##   Comparative Fit Index (CFI)                    0.892
##   Tucker-Lewis Index (TLI)                       0.797
## 
## Loglikelihood and Information Criteria:
## 
##   Loglikelihood user model (H0)             -73474.999
##   Loglikelihood unrestricted model (H1)     -73103.347
##                                                       
##   Akaike (AIC)                              146975.999
##   Bayesian (BIC)                            147063.854
##   Sample-size adjusted Bayesian (SABIC)     147022.544
## 
## Root Mean Square Error of Approximation:
## 
##   RMSEA                                          0.120
##   90 Percent confidence interval - lower         0.113
##   90 Percent confidence interval - upper         0.128
##   P-value H_0: RMSEA <= 0.050                    0.000
##   P-value H_0: RMSEA >= 0.080                    1.000
## 
## Standardized Root Mean Square Residual:
## 
##   SRMR                                           0.059
## 
## Parameter Estimates:
## 
##   Standard errors                             Standard
##   Information                                 Expected
##   Information saturated (h1) model          Structured
## 
## Latent Variables:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 =~                                                                 
##     in501rer          1.000                               0.962    0.518
##     in502rer          1.389    0.050   27.765    0.000    1.336    0.640
##     in503rer          0.875    0.032   26.975    0.000    0.842    0.574
##   F2 =~                                                                 
##     in504rer          1.000                               1.003    0.581
##     in506rer          1.153    0.036   32.210    0.000    1.157    0.640
##     in507rer          1.258    0.039   32.549    0.000    1.261    0.667
## 
## Covariances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##   F1 ~~                                                                 
##     F2                0.681    0.030   22.625    0.000    0.706    0.706
## 
## Variances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##    .in501rer          2.528    0.055   45.914    0.000    2.528    0.732
##    .in502rer          2.574    0.071   36.238    0.000    2.574    0.590
##    .in503rer          1.444    0.034   42.163    0.000    1.444    0.671
##    .in504rer          1.971    0.045   44.057    0.000    1.971    0.662
##    .in506rer          1.926    0.049   39.367    0.000    1.926    0.590
##    .in507rer          1.985    0.054   36.791    0.000    1.985    0.555
##     F1                0.926    0.053   17.612    0.000    1.000    1.000
##     F2                1.005    0.048   20.764    0.000    1.000    1.000
### the chi-squared is smaller than the original two-factor model, although we lost 5 degrees of freedom. the AIC and BIC are lower than the original two-factor model, the CFI is a tad higher but the TLI is a bit lower than the original two-factor model; however, the CFI still does not reach the 0.95 threshold. the RMSEA is a tad lower than the original two-factor model, but still does not fall below the 0.06 threshold. this model fits a teeny bit better, but not really by all that much.

# visualization of the model.
semPaths(model_2fD_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_2fd <- fitted(model_2fD_fit)
exp_matrix_2fd
## $cov
##          in501r in502r in503r in504r in506r in507r
## in501rer  3.453                                   
## in502rer  1.285  4.359                            
## in503rer  0.810  1.125  2.153                     
## in504rer  0.681  0.946  0.596  2.977              
## in506rer  0.786  1.091  0.687  1.160  3.264       
## in507rer  0.857  1.190  0.749  1.264  1.459  3.576
resid_matrix_2fd <- resid(model_2fD_fit)
resid_matrix_2fd
## $type
## [1] "raw"
## 
## $cov
##          in501r in502r in503r in504r in506r in507r
## in501rer  0.000                                   
## in502rer -0.202  0.000                            
## in503rer  0.058  0.089  0.000                     
## in504rer  0.336  0.521  0.170  0.000              
## in506rer -0.017 -0.247 -0.275 -0.099  0.000       
## in507rer  0.064 -0.073 -0.182 -0.218  0.263  0.000

null model.

# lastly, just gonna take a look at the null model to cover all bases.
null_model <- "
  in501rer ~~ in501rer
  in502rer ~~ in502rer
  in503rer ~~ in503rer
  in504rer ~~ in504rer
  in505rer ~~ in505rer
  in506rer ~~ in506rer
  in507rer ~~ in507rer"

# run the CFA and take a look at the fit indices.
null_model_fit <- cfa(null_model, data = data)
summary(null_model_fit, standard = TRUE, fit.measures = TRUE)
## lavaan 0.6.15 ended normally after 9 iterations
## 
##   Estimator                                         ML
##   Optimization method                           NLMINB
##   Number of model parameters                         7
## 
##                                                   Used       Total
##   Number of observations                          6312        9688
## 
## Model Test User Model:
##                                                        
##   Test statistic                              11105.204
##   Degrees of freedom                                 21
##   P-value (Chi-square)                            0.000
## 
## Model Test Baseline Model:
## 
##   Test statistic                             11105.204
##   Degrees of freedom                                21
##   P-value                                        0.000
## 
## User Model versus Baseline Model:
## 
##   Comparative Fit Index (CFI)                    0.000
##   Tucker-Lewis Index (TLI)                       0.000
## 
## Loglikelihood and Information Criteria:
## 
##   Loglikelihood user model (H0)             -88628.385
##   Loglikelihood unrestricted model (H1)     -83075.783
##                                                       
##   Akaike (AIC)                              177270.770
##   Bayesian (BIC)                            177318.022
##   Sample-size adjusted Bayesian (SABIC)     177295.778
## 
## Root Mean Square Error of Approximation:
## 
##   RMSEA                                          0.289
##   90 Percent confidence interval - lower         0.285
##   90 Percent confidence interval - upper         0.294
##   P-value H_0: RMSEA <= 0.050                    0.000
##   P-value H_0: RMSEA >= 0.080                    1.000
## 
## Standardized Root Mean Square Residual:
## 
##   SRMR                                           0.300
## 
## Parameter Estimates:
## 
##   Standard errors                             Standard
##   Information                                 Expected
##   Information saturated (h1) model          Structured
## 
## Variances:
##                    Estimate  Std.Err  z-value  P(>|z|)   Std.lv  Std.all
##     in501rer          3.451    0.061   56.178    0.000    3.451    1.000
##     in502rer          4.361    0.078   56.178    0.000    4.361    1.000
##     in503rer          2.154    0.038   56.178    0.000    2.154    1.000
##     in504rer          2.978    0.053   56.178    0.000    2.978    1.000
##     in505rer          3.310    0.059   56.178    0.000    3.310    1.000
##     in506rer          3.251    0.058   56.178    0.000    3.251    1.000
##     in507rer          3.565    0.063   56.178    0.000    3.565    1.000
### chi-square is much higher than the original two-factor model and we lost 6 degrees of freedom. AIC and BIC are higher than the original two-factor model, CFI and TLI are 0, and RMSEA is much higher than the original two-factor model.

# visualization of the model.
semPaths(null_model_fit)

# take a look at the expected cov matrix and the residual cov matrix.
exp_matrix_null <- fitted(null_model_fit)
exp_matrix_null
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  3.451                                          
## in502rer  0.000  4.361                                   
## in503rer  0.000  0.000  2.154                            
## in504rer  0.000  0.000  0.000  2.978                     
## in505rer  0.000  0.000  0.000  0.000  3.310              
## in506rer  0.000  0.000  0.000  0.000  0.000  3.251       
## in507rer  0.000  0.000  0.000  0.000  0.000  0.000  3.565
resid_matrix_null <- resid(null_model_fit)
resid_matrix_null
## $type
## [1] "raw"
## 
## $cov
##          in501r in502r in503r in504r in505r in506r in507r
## in501rer  0.000                                          
## in502rer  1.083  0.000                                   
## in503rer  0.867  1.213  0.000                            
## in504rer  1.022  1.466  0.769  0.000                     
## in505rer  1.097  1.204  0.598  2.039  0.000              
## in506rer  0.762  0.834  0.409  1.061  1.470  0.000       
## in507rer  0.917  1.111  0.567  1.053  1.365  1.716  0.000